CCS LNLP

New

CCS LNLP

Line lights with parallel high output illumination

The CCS LNLP series provides one million lux at a 50 mm light working distance. They provide parallel light output and despite the high intensity the LNLP series does not have any cooling fans and uses cooling fins to reduce the heat. The original unit shape enables both low and high angle illumination.

It is particularly suitable for surface inspection tasks, such as scratch detection on reflective materials (e.g. glass) and dents on sheet metal.

Open all | Close all

Finegrain light control

By using the PSCC-series controls units, the light intensity value for each light unit circuit can be set through the external control. Also, burn-out errors in LED circuits can be detected.

Optimised housing shape

For use at the site of inspection, the Light Unit shape is optimised with its light emitting tip shifted to one side of the Light Unit body. As a result, the camera view is not blocked during illumination, and the light unit can be installed close to the workpiece.

Specifications

Power supply: current controlled series, not 24V - recommended power supply: CCS PSCC-30048/CS PSCC-60048
Options: available in white (5800 K)
Dimensions: light emitting surfaces from 100x21 mm to 1000x21 mm, outer dimensions from 161x60.2 mm to 1061x60.2 mm

Show products

Colour white

CCS LNLP-1000SW

Linienbeleuchtung mit sehr heller Abstrahlcharakteristik