STEMMER IMAGING
Schweiz / Deutsch
Member of PRIMEPULSE

KAMERAS

Von Flächen- und Zeilenkameras bis zu

komplexen Speziallösungen

  1. Home
  2. Kameras
  3. Teledyne e2v UNiiQA+

Teledyne e2v UNiiQA+

Cost effective CMOS line scan camera with colour and monochrome models

The Teledyne e2v UNiiQA+ series offers a range of line scan cameras that have been optimised for low-cost inspection equipment. The cameras are available in monochrome and Bayer colour, with resolutions of 2k, 4k and 16k, and a CameraLink or GigE Vision over NBASE-T (5 Gb/s) interface.

The 5µm pixel pitch sensor design enables the UNiiQA+ to stand out as the most compact line scan camera on the market today and it is C-mount compatible at any resolution up to 4k pixels.

Reasons to choose the Teledyne e2v UNiiQA+

Open all | Close all
Versatility thanks to a variety of hardware configurations

The UNiiQA+ range offers a selection of different models, depending on the requirements of the application. Users can choose between a resolution of 2k, 4k and 16k in monochrome or Bayer colour. This gives customers the ability to continue to use the UNiiQA+ platform if they need to change tasks and camera.

Cost effective solution for colour recognition, inspection or sorting

The UNiiQA+ colour sensor is composed of two sensitive lines, one has green pixels, while the second has alternating red and blue pixels. The design is a much more cost effective solution when compared to the tri-linear or prismatic cameras. The cameras can deliver high accuracy colour definition thanks to its internal colour correction matrix and improved interpolation correction. There are no ghosting artefacts from the Bayer colour patterns.

High speed imaging on the Ethernet network

The UNiiQA+ cameras with an NBASE-T interface provide five times higher data bandwidth than a standard GigE Vision interface, whilst using conventional CAT5e Ethernet cables, up to 100m long without repeaters.

Specifications

  • Sensor: CMOS line scan
  • Resolution: 2k, 4k and 16k pixels
  • Line rate: up to 100KHz with CameraLink, up to 140KHz with NBASE-T interface (4K pixels monochrome)
  • Pixel size: 5µm x 5µm and 10µm x 10µm
  • Options: monochrome and Bayer colour models
  • Lens mount: C-mount, M42, M95-mount or F-mount lens adapter
  • Interface: CameraLink, GigE Vision over NBASE-T (5 Gb/s)
  • Features: multi ROI * , cycling mode * , LUT, colour matrix correction, flat field correction (*in the NBASE-T models)

Markets and Applications

  • Roughness and scratch detection in surface inspection (glass, paper, metal, textile)
  • Presence control in pharmaceutical inspection
  • Damage detection in rail inspection applications
  • Character recognition in document scanning, parcel and postal sorting

Kontakt aufnehmen

Technical Support

+41 55 41590-90
+41 55 41590-91
support@stemmer-imaging.ch

Sales / Consulting

+41 55 4159090
+41 55 4159091
info@stemmer-imaging.ch

Callback Service

If you have a question or need some information please provide us some data. Our sales team will callback as soon as possible!

Callback Service

to
to
to
to
of products were found. products were found. Show all
Model Schnittstelle Objektivanschluss Pixelgröße (µm) Horizontale Aufl. Max. Zeilenfreq. (kHz) Sensorlänge (mm)
TELEDYNE E2V UNIIQA+ CC-02K40D CameraLink M42, F-mount, C-mount 10,0 2048 40 21
TELEDYNE E2V UNIIQA+ CC-02K80D CameraLink M42, F-mount, C-mount 10,0 2048 80 21
TELEDYNE E2V UNIIQA+ CC-04K20D CameraLink M42, F-mount, C-mount 5,0 4096 20 21
TELEDYNE E2V UNIIQA+ CC-04K40D CameraLink M42, F-mount, C-mount 5,0 4096 40 21
TELEDYNE E2V UNIIQA+ CC-04K40D-MR CameraLink M42, F-mount, C-mount 5,0 4096 40 21
TELEDYNE E2V UNIIQA+ CC-04K80D-MR CameraLink M42, F-mount, C-mount 5,0 4096 80 21
TELEDYNE E2V UNIIQA+ CM-02K100 CameraLink M42, F-mount, C-mount 10,0 2048 100 21
TELEDYNE E2V UNIIQA+ CM-02K40 CameraLink M42, F-mount, C-mount 10,0 2048 40 21
TELEDYNE E2V UNIIQA+ CM-04K100 CameraLink M42, F-mount, C-mount 5,0 4096 100 21
TELEDYNE E2V UNIIQA+ CM-04K100-MR CameraLink M42, F-mount, C-mount 5,0 4096 100 21
TELEDYNE E2V UNIIQA+ CM-04K20 CameraLink M42, F-mount, C-mount 5,0 4096 20 21
TELEDYNE E2V UNIIQA+ CM-04K40-MR CameraLink M42, F-mount, C-mount 5,0 4096 40 21
TELEDYNE E2V UNIIQA+ CM-16K50-BA1 CameraLink M95 5,0 16384 50 82
TELEDYNE E2V UNIIQA+ CM-16K50-BA2 CameraLink M95 5,0 16384 50 82
TELEDYNE E2V UNIIQA+ GC-02K100D NBase-T M42, F-mount, C-mount 10,0 2048 100 21
TELEDYNE E2V UNIIQA+ GC-04K100D NBase-T M42, F-mount, C-mount 5,0 4096 100 21
TELEDYNE E2V UNIIQA+ GM-02K140 NBase-T M42, F-mount, C-mount 10,0 2048 140 21
TELEDYNE E2V UNIIQA+ GM-04K140 NBase-T M42, F-mount, C-mount 5,0 4096 140 21