Machine Vision Acquisition - STEMMER IMAGING


Secure and flexible image capture from

any source to any destination


PCIe x4 Gen 2.0 Frame Grabber for acquisition of digital signals via CameraLink

  • Acquisition from area and line scan cameras
  • Supports a variety of Tap formats, bit depths and scan directions
  • Bit depth: 8 to 16 Bit Mono, 8 to 12 Bit Colour (depending on tap configuration)
  • Supported tap configuration CameraLink Base, Dual Base, Medium, Full or 80-bit
  • PixelClock: 20-85 MHz
  • max. Data rate 1700 Mbytes/s (PCIe x4 Gen 2.0)
  • 850 Mbytes/s (PCIe Gen 1.0)


  • 4x Opto isolated Trigger (ExSync: Frame/Line)
  • 4x TTL Outputs, configurable
  • Encoder Inputs (RS422, AB with shaft encoder)

Features (selection):

  • 512 MB onboard frame buffer
  • Line trigger scaling
  • iLUT for colour cameras
  • Configuration of the camera via CameraLink
  • Data Transfer Engine (DTE) for maximum bandwidth
  • Power over CameraLink (PoCL) for CL Full, Medium, and Base
  • 2 x SDR26 for Camera Link and 27 pin connector for GPIO
  • CL-optimized input for long cable lengths
  • Multi-board synchronization
  • Half-length PCIe x4 card

Software SDKs:

  • Supports Sapera LT
  • Drivers for Common Vision Blox available
  • Hardware and software documentation, if ordered separately!

Supported operating systems:

  • Windows 7 32 - and 64-bit
  • Windows 8.1 32 - and 64-bit
  • Windows 10 32 - and 64-bit
  • Linux 64-bit
  • WoW64
  • Incl. Power breakout cable assembly for DALSA XTIUM
Product features
Signal digital
Programmable no
Power over data interface yes
Pixel clock (MHz) 85
PC interface PCIe x4 (Gen 2)
Operating system Windows 7 (32/64-bit) / Windows 8 (32/64-bit) / Windows 10 (32/64-bit) / Linux (32/64-bit) / Wow64
Onboard processing yes
Onboard memory (MB) 512
Number of cameras (max) 2
Note 2 Multi-board sync acquisition, 12-bit Bayer Decoding, 3x2 bad-pixel replacement, Linescan Stobe Cycling, Direct CC I/Os,
Manufacturer Teledyne DALSA
Interface/standard CameraLink
Inputs Full / Deca / Base / Medium
I/Os yes
Driver support Common Vision Blox
Dimensions (LxH, mm) 100 x 100
Design (plug-in card/box) Plug-in card
Connectors 2* SDR
Certificate CE / RoHS