Colour Line Scan Technology - Prism


Part 2 of our colour line scan series

Read more

Teledyne DALSA Piranha4 Color

High speed CMOS line scan camera with superior colour image quality

The Teledyne DALSA Piranha4 Color is a highly sensitive colour line scan camera, offering various sensor configurations from two to four lines, focusing on different imaging applications. Depending on the particular application, the user can choose between the 2k version with 14 µm pixel size with three or four lines, the 4k version with 10 µm pixel size and three lines as well as two 8k models with 7 µm pixels dual lines or 7.5 µm with three lines.

Teledyne DALSA CMOS image sensors' high dynamic range, combined with on-chip ADC for high speed, gives the Piranha4 cameras unprecedented performance. Precise sensor alignment simplifies multiple camera calibration at the system level.

In addition to its high speed with up to 70 kHz, the Piranha4 Color also features advanced capabilities such as spatial correction on a subpixel level, lens and shading correction, as well as flat field correction.

Reasons to choose the Teledyne DALSA Piranha4 Color

Multispectral colour imaging

The Piranha4 Color's quadlinear CMOS sensor provides multispectral capability by capturing three native colours (red, green, blue) and a separate NIR channel. The minimal spatial separation offers the a maximum in colour accuracy with a frequency of 70 kHz. The unique feature of an additional NIR sensitive line allows for simultaneous feature detection in the visible and the NIR spectrum. Systems can be designed with a single camera instead of two dedicated sensors. Moreover, the whole sensor with all 4 lines (red, green, blue, NIR) requires only a single IR-corrected lens, which gives an excellent price performance ratio while maintaining a wide selection of lensing options.

Multiple area of interest feature

The multi AOI feature allows the creation of up to 4 AOIs. This can be useful when inspecting several separated lanes of objects with a single camera, just by ignoring the image area between these lanes. Acquiring only the relevant image content means a reduction of data to process. This relieves the actual image processing stage and gives room for either faster computation or allows for less powerful hardware systems. Transferring less data also offers the possibility to use more economic cabling configurations.

Multiple regions of interest (ROI) for flat field correction

Flat field correction (FFC) can be used to correct high intensity variations caused by either illumination or lensing. The Piranha4 Color provides up to 4 regions within the pixel line to be specified for flat field correction. A well calibrated image improves and simplify the image processing. It requires less complex image processing and therefore saves development time.

Large selection of different models

Depending on the application, there is a choice between the 2k version with 14 µm pixel size (three or four lines), the 4k version with 10 µm pixel size (three lines) and the 8k model with 7 µm pixels (dual line). Since the Piranha4 Color series is a family with different resolutions and different spectral sensitivity, there is a large selection of models that can be chosen according to the requirements of the application. This flexibility provides the opportunity to rely on the Piranha4 Color platform even in the case of changing tasks. Using a proven, well known system as a basis offers time savings on new development and integration tasks.


  • Sensor: tri-linear CMOS sensor with 8192, 4096 and 2048 pixels, quad-linear version of 2k model with additional mono or NIR line, dual line 8192 pixel model with 7 µm pixels
  • Line rate: 70 kHz (50 kHz 8k model)
  • Pixel size: 10 μm and 14 µm 2k and 4k version, 7 μm or 7.5 μm 8k version, square pixels
  • Features: multiple areas of interest, flat-field correction, automatic white balancing, independent exposure control for each colour, subpixel spatial correction, integrated exposure control, adjustable gain and offset
  • Lens mount: M42, M58, M72, F-Mount
  • Interface: CameraLink Full, GenICam or ASCII-command compatible

Markets and Applications

  • 100% quality print inspection tasks
  • High resolution surface and web inspection applications
  • Maximum precision Automatic Optical Inspection (AOI) solutions in semiconductor quality assurance
  • Identifcation of physical properties in material grading systems
  • Detection of hidden damages in food inspection solutions
  • Checking of hidden security features in print or currency applications

Show products

of products were found. products were found. Show all
Model Interface Lens mount Pixel size (µm) Horizontal res. Max. line freq. (kHz) Sensor length (mm)
DALSA P4-CC-02K04T-01R CameraLink M42, F-mount 14.08 2048 40 28.8
DALSA P4-CC-02k07N CameraLink M42, F-mount 14.08 2048 70 28.8
DALSA P4-CC-02k07Q CameraLink M42, F-mount 14.08 2048 70 28.8
DALSA P4-CC-02k07T CameraLink M42, F-mount 14.08 2048 70 28.8
DALSA P4-CC-04K04T-01R CameraLink M58, F-mount 10.56 4096 40 43.3
DALSA P4-CC-04K07T CameraLink M58, F-mount 10.56 4096 70 43.3
DALSA P4-CC-08K050 CameraLink F-mount, M72 7.04 8192 50 57.7

CAM AC-UN-00008

F-mount adapter with reinforced Nikon-Bayonet
* For adaptation (with 4 mounting screws) on the camera front plate

  • To be used for ...