With the trigger-to-image reliability framework, the image capture process is controlled and monitored end-to-end from the trigger to the transfer to the host memory. This way data loss is clearly tracked and the reliability of the overall inspection process is improved. This helps in increasing the quality of your inspection by sorting out parts that have not been inspected due to shortfalls in the image capture process.
Teledyne DALSA Genie Nano-CL
CameraLink camera with high speed and outstanding image quality
The Teledyne DALSA Genie Nano-CL comprises an impressing set of features in a robust housing. The latest CMOS sensors guarantee excellent image quality while the wide temperature range increases system reliability and endurance.
The global shutter device delivers high speed and low noise image data. The Genie Nano-CL is always designed with the smallest possible casing for the sensor size and data interface.
The Genie Nano-CL has been designed to work synergistically with the half-length Teledyne DALSA Xtium-CL frame grabber to minimise CPU usage and improve processing times.
Reasons to choose the Teledyne DALSA Genie Nano-CL
Different applications have different requirements for image acquisition and image processing. Some of these sometimes demanding requirements are high dynamic range, 10 bit pixel depth, use of the camera sensor’s highest internal read-out speed, or extending the capacity of the data throughput by means of (lossless or lossy) image compression.
The extended operating temperature range makes the Teledyne DALSA Genie Nano an ideal match for harsh environments. Even with temperature differences there is no need for external cooling or protective housings. As no additional components are needed to keep the camera at a suitable temperature, very compact test cells can be built. The high temperature range and high MTBF helps to extend camera life and increase system reliability. This leads to fewer or no production outages and extends the endurance of a machine.
The cycling mode implements a method to use various different user-controlled configurations. This allows working with different light sources, lighting angles, exposure times, gains etc. for every line. That way, a single pass with a single camera delivers a high amount of information which is comparable to that of multiple cameras or combinations of camera and frame grabber. With this feature, costly and complex hardware solutions can be avoided, since e.g. multiple illumination variants of the same object increase failure detection and production security. It can also reduce inspection time in cases where various illumination set-ups are mandatory to inspect one object.
- Sensor: from Sony, ON Semiconductor and E2V, colour and monochrome models as well as models with NIR sensitivity available
- Resolution: 2464 x 2056 to 5112 x 5112 pixels
- Frame rates: from 20 fps to 141 fps
- Features: cycling mode for various features, binning, defect pixel correction, look-up-table
- Lens mount: M42-mount, C-mount
- Interface: CameraLink with Power over CameraLink (PoCL)
- Camera Specification: GeniCam GenCP compliant
- Operating temperature: -20° C to 65° C
- Dimensions: 44 x 44 x 23 or 59 x 59 x 30 (W x H x D in mm)
- Weight: 72 or 163 g
Markets and Applications
- Industrial automation tasks where small and lightweight cameras required
- 100% quality control in electronics manufacturing
- Completeness checking in pick and package applications
- Semiconductor PCB-AOI (automated optical inspection) systems
- Traffic observation systems in law enforcement
- Sorting decisions in food quality inspection applications
Teledyne DALSA Trigger to Image Reliability
For prices use login
|Model||Resolution (MP)||Frame rate (Hz)||Interface||Lens mount||Sensor type||Horizontal res. (Px)||Vertical res. (Px)||Manufacturer||Sensor format|
|DALSA GENIE NANO-CL C2420||5.0||32.5||CameraLink||C-Mount||CMOS||2464||2056||Teledyne DALSA||2/3"|
|DALSA GENIE NANO-CL C2450||5.1||141.8||CameraLink||C-Mount||CMOS||2464||2056||Teledyne DALSA||2/3"|
|DALSA GENIE NANO-CL C4020 IRC||12.4||20.0||CameraLink||C-Mount||CMOS||4112||3008||Teledyne DALSA||1.1"|
|DALSA GENIE NANO-CL C4040||12.4||64.0||CameraLink||C-Mount||CMOS||4112||3008||Teledyne DALSA||1.1"|
|DALSA GENIE NANO-CL C4060||8.9||87.6||CameraLink||C-Mount||CMOS||4112||2176||Teledyne DALSA||1"|
|DALSA GENIE NANO-CL C4090 New model||16.8||45.0||CameraLink||Nikon F-Mount||CMOS||4096||4096||Teledyne DALSA||APS-H|
|DALSA GENIE NANO-CL C5100 New model||26.2||32.0||CameraLink||M42 x 1, Nikon F-Mount||CMOS||5112||5112||Teledyne DALSA||APS-H|
|DALSA GENIE NANO-CL M2420||5.0||32.5||CameraLink||C-Mount||CMOS||2464||2056||Teledyne DALSA||2/3"|
|DALSA GENIE NANO-CL M2450||5.1||141.8||CameraLink||C-Mount||CMOS||2464||2056||Teledyne DALSA||2/3"|
|DALSA GENIE NANO-CL M4020||12.4||20.0||CameraLink||C-Mount||CMOS||4112||3008||Teledyne DALSA||1.1"|
|DALSA GENIE NANO-CL M4040||12.4||64.0||CameraLink||C-Mount||CMOS||4112||3008||Teledyne DALSA||1.1"|
|DALSA GENIE NANO-CL M4060||8.9||87.6||CameraLink||C-Mount||CMOS||4112||2176||Teledyne DALSA||1"|
|DALSA GENIE NANO-CL M4090||16.8||45.0||CameraLink||M42 x 1, Nikon F-Mount||CMOS||4096||4096||Teledyne DALSA||APS-H|
|DALSA GENIE NANO-CL M4090-NIR||16.8||45.0||CameraLink||M42 x 1, Nikon F-Mount||CMOS||4096||4096||Teledyne DALSA||APS-H|
|DALSA GENIE NANO-CL M5100||26.2||32.0||CameraLink||M42 x 1, Nikon F-Mount||CMOS||5112||5112||Teledyne DALSA||APS-H|
|DALSA GENIE NANO-CL M5100-NIR||26.2||32.0||CameraLink||M42 x 1, Nikon F-Mount||CMOS||5112||5112||Teledyne DALSA||APS-H|