Intelligent digital frame grabbers with FPGA image processing
5 Feb 2018
The microEnable 5 Ironman series is characterised by data transfer to the host PC via PCI Express x8 (2nd Generation). Use of DMA3600 technology from Silicon Software allows data transfers of 3.6 GB/s to be achieved as a constant value. The microEnable5 Marathon series transfers image data to the host PC via PCI Express x4 (2nd generation). By using DMA1800 technology, sustained data transfers of 1.8 GB/s can be achieved.
Both families of frame grabbers are available in image acquisition and programmable versions. Both feature an on-board vision FPGA for fast, optimised pre-processing or pre-analysis of image data to reduce the load on the host CPU. The image acquisition versions are pre-programmed with user-selectable image processing functionality, while the programmable versions provide users with the freedom to create their own image processing routines, using Silicon Software’s powerful Visual Applets software.
The Visual Applets development environment allows hardware, software and application engineers to use FPGA processors for their image processing needs. It simplifies the development of image processing routines as no knowledge is required of circuitry, synchronisation, timings or FPGA programming. This saves valuable development time for the given application. In addition, STEMMER IMAGING is a certified Visual Applets partner and offers the creation of individual Visual Applets designs to allow users to free up resources and focus on their core business.
The microEnable5 frame grabbers provide a rich range of additional functionality, including:
- Up to 2GB on-board memory
- Supports long cable lengths
- Built-in power supply for cameras
- Low latency for precise triggering capability and feedback channels to camera
- Configurable trigger system supporting several trigger modes
- GPIO: 8in/8out (max.), TTL or opto-coupled
- Supports STEMMER IMAGING’s Common Vision Blox imaging toolkit
The CoaXPress frame grabbers provide support for up to 4 cameras, while the CameraLink and CameraLink HS versions can accommodate two cameras. Capturing data from multiple cameras on a single board reduces the number of frame grabbers needed, thus saving costs on the technical infrastructure required for multi-camera applications.
A powerful CoaXPress, CameraLink or CameraLink HS interface frame grabber for demanding machine vision applications
Silicon Software GmbH was founded in 1997 as a product development and manufacturing company with focus on the automation and machine vision markets. Headquarters are located in Mannheim, Germany where Silicon Software develops and produces off-the-shelf and customised OEM hardware and software solutions.