Teledyne DALSA Genie Nano-CL

New

Teledyne DALSA Genie Nano-CL

CameraLink camera with high speed and outstanding image quality

The Teledyne DALSA Genie Nano-CL comprises an impressing set of features in a robust housing. The latest CMOS sensors guarantee excellent image quality while the wide temperature range increases system reliability and endurance.

The global shutter device delivers high speed and low noise image data. The Genie Nano-CL is always designed with the smallest possible casing for the sensor size and data interface.

The Genie Nano-CL has been designed to work synergistically with the half-length Teledyne DALSA Xtium-CL frame grabber to minimise CPU usage and improve processing times.

Genie Nano with CameraLink Interface

Reasons to choose the Teledyne DALSA Genie Nano-CL

Open all | Close all

Reliable data loss protection

With the trigger-to-image reliability framework, the image capture process is controlled and monitored end-to-end from the trigger to the transfer to the host memory. This way data loss is clearly tracked and the reliability of the overall inspection process is improved. This helps in increasing the quality of your inspection by sorting out parts that have not been inspected due to shortfalls in the image capture process.

Flexible configuration for various usage scenarios

Different applications have different requirements for image acquisition and image processing. Some of these sometimes demanding requirements are high dynamic range, 10 bit pixel depth, use of the camera sensor’s highest internal read-out speed, or extending the capacity of the data throughput by means of (lossless or lossy) image compression.

Extended system reliability and endurance

The extended operating temperature range makes the Teledyne DALSA Genie Nano an ideal match for harsh environments. Even with temperature differences there is no need for external cooling or protective housings. As no additional components are needed to keep the camera at a suitable temperature, very compact test cells can be built. The high temperature range and high MTBF helps to extend camera life and increase system reliability. This leads to fewer or no production outages and extends the endurance of a machine.

Cycling mode to cycle through preset camera parameters

The cycling mode implements a method to use various different user-controlled configurations. This allows working with different light sources, lighting angles, exposure times, gains etc. for every line. That way, a single pass with a single camera delivers a high amount of information which is comparable to that of multiple cameras or combinations of camera and frame grabber. With this feature, costly and complex hardware solutions can be avoided, since e.g. multiple illumination variants of the same object increase failure detection and production security. It can also reduce inspection time in cases where various illumination set-ups are mandatory to inspect one object.

Specifications

Sensor: from Sony, ON Semiconductor and E2V, colour and monochrome models as well as models with NIR sensitivity available
Resolution: 2464 x 2056 to 5112 x 5112 pixels
Frame rates: from 20 fps to 141 fps
Features: cycling mode for various features, binning, defect pixel correction, look-up-table
Lens mount: M42-mount, C-mount
Interface: CameraLink with Power over CameraLink (PoCL)
Camera Specification: GeniCam GenCP compliant
Operating temperature: -20° C to 65° C
Dimensions: 44 x 44 x 23 or 59 x 59 x 30 (W x H x D in mm)
Weight: 72 or 163 g

Markets and Applications

Industrial automation tasks where small and lightweight cameras required
100% quality control in electronics manufacturing
Completeness checking in pick and package applications
Semiconductor PCB-AOI (automated optical inspection) systems
Traffic observation systems in law enforcement
Sorting decisions in food quality inspection applications

Show products

of products were found. products were found. Show all

Model	Resolution (MP)	Frame rate (Hz)	Interface	Lens mount	Sensor type	Horizontal res. (Px)	Vertical res. (Px)	Manufacturer	Sensor format
DALSA GENIE NANO-CL C2420 New model	5.0	32.5	Mini CameraLink	C-mount	CMOS	2464	2056	Teledyne DALSA	2/3"
DALSA GENIE NANO-CL C2450 New model	5.1	141.8	CameraLink	C-mount	CMOS	2464	2056	Teledyne DALSA	2/3"
DALSA GENIE NANO-CL C4020 IRC New model	12.36	20	Mini CameraLink	C-mount	CMOS	4112	3008	Teledyne DALSA	1.1"
DALSA GENIE NANO-CL C4040	12.4	64	CameraLink	C-mount	CMOS	4112	3008	Teledyne DALSA	1.1"
DALSA GENIE NANO-CL C4060 New model	8.9	87.6	CameraLink	C-mount	CMOS	4112	2176	Teledyne DALSA	1"
DALSA GENIE NANO-CL C4090 New model	16.8	45	CameraLink	F-mount	CMOS	4096	4096	Teledyne DALSA	APS-H
DALSA GENIE NANO-CL C5100 New model	26.2	32	CameraLink	M42, F-mount	CMOS	5112	5112	Teledyne DALSA	APS-H
DALSA GENIE NANO-CL M2420 New model	5.0	32.5	Mini CameraLink	C-mount	CMOS	2464	2056	Teledyne DALSA	2/3"
DALSA GENIE NANO-CL M2450	5.1	141.8	CameraLink	C-mount	CMOS	2464	2056	Teledyne DALSA	2/3"
DALSA GENIE NANO-CL M4020 New model	12.36	20	Mini CameraLink	C-mount	CMOS	4112	3008	Teledyne DALSA	1.1"
DALSA GENIE NANO-CL M4040	12.4	64	CameraLink	C-mount	CMOS	4112	3008	Teledyne DALSA	1.1"
DALSA GENIE NANO-CL M4060 New model	8.9	87.6	CameraLink	C-mount	CMOS	4112	2176	Teledyne DALSA	1"
DALSA GENIE NANO-CL M4090	16.8	45	CameraLink	M42, F-mount	CMOS	4096	4096	Teledyne DALSA	APS-H
DALSA GENIE NANO-CL M4090-NIR	16.8	45	CameraLink	M42, F-mount	CMOS	4096	4096	Teledyne DALSA	APS-H
DALSA GENIE NANO-CL M5100	26.2	32	CameraLink	M42, F-mount	CMOS	5112	5112	Teledyne DALSA	APS-H
DALSA GENIE NANO-CL M5100-NIR	26.2	32	CameraLink	M42, F-mount	CMOS	5112	5112	Teledyne DALSA	APS-H

File	Topics	Size
Teledyne DALSA Genie Nano-CL Brochure \| 2020	Data sheets	1.5 MB
Teledyne DALSA Genie Nano-CL Series Manual \| 0003	Manuals	5.0 MB
Teledyne Dalsa Machine Vision Products Brochure	Data sheets	3.2 MB
Trigger-To-Image Reliability Technology Primer	Data sheets	1.1 MB

STEMMER IMAGING

SMALLER, FASTER, STRONGER >

Break through the GigE limit