Standard UV LEDs are vulnerable to static built-up, which can encourage sparking and subsequent LED failure. Additionally, many UV lights use components made of iron alloys, which makes the problem worse. To remedy this problem, CCS UV LEDs have three leads – one more than most UV LEDs – which helps protect against sparking caused when conductive material gets too close to the LEDs.
CCS UV2
Ultraviolet LED illumination
Ultraviolet light is often used to fluoresce materials such as glue or ink and is used in a variety of applications in the medical or scientific imaging sectors. In many cases, the use of UV Illumination simplifies the analysis of images considerably by highlighting features not easily detected with light from the visible spectrum.
UV lights are suitable for medical and scientific imaging, where the wavelength levels are used to fluoresce specific regions of the inspection area. The high output UV2 lights are also ideal for grease, adhesive coating, ITO film and flux inspections.
CCS UV LED design
Various form factors
The CCS UV2 range devices are available as ring lights, bar lights, spotlights and short line lights, making them suitable for a wide variety of UV applications.
Wide and narrow types
The ring lights and bar lights are available as wide type (with the suffix –W) or narrow type (with the suffix –N) in the UV2 series. With the narrow types, the radiation angle is narrowed with a special lens in front of the LEDs, the result is irradiation levels that are 3 times higher than the wide type models. They are particularly suited for irradiation at large working distances.
Specifications
- Wavelength: 365 nm
- Power supply: 24 V lights and a current controlled spot (CCS HLV2-24UV2-365)
- Ring light dimensions: outer diameter 60 mm, inner diameter 30 mm and outer diameter 100 mm, inner diameter 30 mm
- Bar light dimensions: 91 mm x 45.6 mm (length x width) to 359 mm x 45.6 mm (length x width)
- Short line light dimensions: 91 mm x 47.6 mm (length x width) to 225 mm x 47.6 mm (length x width)
- Spot light dimensions: length 54 mm, diameter 26 mm
CCS UV
LED reflected light for continuous or strobe operations
- Dimensions of emitting surface (130 x 15) mm²
- Light output directed in ...
LED Auflichtleiste for continuous or strobe operations
- Dimensions of emitting surface (180 x 16) mm ²
- Light output directed in ...
LED Auflichtleiste for continuous or strobe operations
- Dimensions of emitting surface (34 x 8) mm ²
- Light output directed in ...
LED reflected light for continuous or strobe operations
- Dimensions of emitting surface (42 x 15) mm ²
- Light output directed ...
Bar light for continuous or strobe operation
- LED, UV (365 nm)
- Emitting surface (74 x 27) mm²
- 4 rows of ...
LED reflected light for continuous or strobe operations
- Dimensions of emitting surface (82 x 15) mm ²
- Light output directed ...
LED Auflichtmodul for continuous or strobe operation
- 4 x Illuminated strips with adjustable angle
- Light output directed in 2 rows ...
LED Auflichtmodul for continuous or strobe operation
- 4 x Illuminated strips with adjustable angle
- Light output directed in 2 rows ...
LED Auflichtmodul for continuous or strobe operation
- 4 x Illuminated strips with adjustable angle
- Light output directed in 2 rows ...
LED quad bar light for continuous or strobe operation
- Arranged in a square unit
- Dimensions: 58 x 58 x 12 ...
LED Auflichtmodul for continuous or strobe operation
- 4 x Illuminated strips with adjustable angle
- Light output directed in 1 row ...
CCS Dark Field ringlight
- Outside diameter 146 mm
- Inner diameter 110 mm
- Recommended LWD 5 to 10mm
- Directed light emission ...
CCS Dark Field ringlight
- Outside diameter 176 mm
- Inner diameter 140 mm
- Recommended LWD 5 to 10mm
- Directed light emission ...
CCS dark field ringlight
- Outside diameter 206 mm
- Inner diameter 170 mm
- Recommended LWD 5 to 10mm
- Directed light emission ...
CCS dark field ringlight
- Outside diameter 75 mm
- Inner diameter 46 mm
- Recommended LWD 5 to 10 mm
- 1 lightring ...
CCS dark field ringlight
- Outside diameter 96 mm
- Inner diameter 60 mm
- Recommended LWD 5 to 10 mm
- 1 lightring ...
CCS dark field ringlight
- Outside diameter 100 mm
- Inner diameter 70 mm
- Recommended LWD 5 to 30mm
- 3 lightrings with ...
LED ringlight for easy mounting
- Outside diameter 120 mm
- Inner diameter 60 mm
- Mounted with M3 screws
- Light UV (365 ...
CCS dark field ringlight
- Outside diameter 132 mm
- Inner diameter 96 mm
- Recommended LWD 5 to 30mm
- 3 lightrings with ...
CCS dark field ringlight
- Outside diameter 170 mm
- Inner diameter 134 mm
- Recommended LWD 5 to 40mm
- 3 lightrings with ...
CCS dark field ringlight
- Outside diameter 208 mm
- Inner diameter 174 mm
- Recommended LWD 5 to 40 mm
- 2 lightrings ...
CCS ringlight
- Outside diameter 32 mm
- Inner diameter 10 mm
- Recommended LWD 10 to 30 mm
- 1 lightring with directed ...
LED ringlight
- Outside diameter 42 mm
- Inner diameter 18 mm
- Recommended LWD 20 to 60 mm
- 1 lightring with directed ...
LED ringlight
- Outside diameter 50 mm
- Inner diameter 28 mm
- Recommended LWD 30 to 80 mm
- 1 lightring with directed ...
LED ringlight
- Outside diameter 70 mm
- Inner diameter 35 mm
- Recommended LWD 50 to 100 mm
- 3 lightrings with directed ...
CCS dark field ringlight
- Outside diameter 74 mm
- Inner diameter 48 mm
- Recommended LWD 5 to 30 mm
- 1 lightrings ...
LED ringlight
- Outside diameter 90 mm
- Inner diameter 30 mm
- Recommended LWD 60 to 150 mm
- 4 lightrings with directed ...
LED ringlight
- Outside diameter 90 mm
- Inner diameter 50 mm
- Recommended LWD 60 to 120 mm
- 2 lightrings with directed ...
Compact line light
- Line length 200 mm
- Colour UV (365 nm)
- Integrated rod lense
- Focus adjustable
- Operating voltage 24 VDC ...
LED-Spotlight, 12 VDC, 41 x 40 mm, UV
CCS High density square format ringlight, 24V, 56mm x 56mm, ID 30mm, UV 365nm
CCS UV2
LED Spot light Wide Type
- Current controlled, no 24V! 3,2W
- high power UV (365 nm)
- Dimensions: 20 x 14 ...
LED barlight, High Power UV 365 nm, wide type
- Dimmensions: 225 x 42 x 28 mm (L x W x ...
LED barlight, High Power UV 365 nm, narrow type
- Dimmensions: 225 x 42 x 28 mm (L x W x ...
LED barlight, High Power UV 365 nm
- Dimmensions: 359 x 42 x 28 mm (L x W x H)
- Emmitting ...
LED barlight, High Power UV 365 nm, Narrow Type
- Dimmensions: 359 x 42 x 28 mm (L x W x ...
LED barlight, High Power UV 365 nm
- Dimmensions: 91 x 42 x 28 mm (L x W x H)
- emmitting ...
LED ringlight, High Power UV (365 nm) Narrow Type
- Outside diameter 100 mm
- Inner diameter 30 mm
- Light UV (365 ...
LED ringlight, High Power UV 365 nm
- Outside diameter 100 mm
- Inner diameter 30 mm
- Recommended LWD 30 to 50 ...
LED ringlight, High Power UV (365 nm) Narrow Type
- Outside diameter 60 mm
- Inner diameter 30 mm
- Recommended light working ...
LED ringlight, High Power UV (365 nm)
- Outside diameter 60 mm
- Inner diameter 30 mm
- Recommended light working distance (LWD ...
LED linelight, High Power UV 365 nm Wide Type
- Dimmensions: 158 x 44 x 47,5 mm (L x W ...
LED linelight, High Power UV 365 nm Wide Type
- Dimmensions: 225 x 44 x 47,5 mm (L x W ...
LED linelight, High Power UV 365 nm Wide Type
- Dimmensions: 91 x 44 x 47,5 mm (L x W ...
Diffusors
Diffusion plate for CCS LDL-130/15
Diffusion plate for CCS LDL-180/16
Diffusion plate CCS LDL-34/8
Diffusion plate for CCS LDL-82/15
Diffusion Plate For CCS LDQ100
Diffusion Plate For CCS LDQ150
Diffusion Plate For CCS LDQ200
Diffusion Plate For CCS LDQ78
Diffusion Plate For CCS LDR2-100LA
Diffusion plate for CCS LDR2-132LA
Diffusion Plate For CCS LDR2-170LA
Diffusion Plate For CCS LDR2-208LA
Diffusion plate for CCS LDR2-70
Diffusion Plate For CCS LDR2-74LA
Polariser
CCS Polarising Plate For LDL-130X15
CCS Polarising Plate For LDL-180/16
CCS Polarising Plate For LDL-34/8
CCS Polarising Plate For LDL-42X15
CCS Polarising Plate For LDL-74X27
CCS Polarising Plate For LDL-82/15
CCS Polarising Plate Set For LDQ-100
CCS Polarising Plate Set For LDQ-150
CCS Polarising Plate Set For LDQ-200
CCS Polarising Plate Set For LDQ-78
CCS Polarising plate for LDR2-120
CCS Polarising plate for LDR2-42
*need CCS AD-LDR2-42
Polarising plate (incl. adapter) for CCS LDR2-70