The 1/2" high-resolution monochrome JAI A1 camera is part of JAI's A series.
It features a 1,392 x 1,040 pixel resolution and a frame rate of 16 frames/s
in a compact housing measuring just (44 x 66 x 29)mm³.
When binning and partial scan are used, the JAI A1 progressive scan camera can
achieve up to 125 frames/s at a reduced resolution. The binning function has
been extended in the JAI A1 and now allows users to choose between horizontal
and vertical binning or a combination of the two. The JAI A1's shutter times
can be adjusted in 16 steps between 1/16 s and 1/200,000 s.
Like all the camera models in the A series, the JAI A1 is also equipped with a
serial RS-232 interface which permits not only the usual camera settings to be
adjusted but also all modifications such as pin allocation and synchronisation
The pin-out of the 12-pin Hirose connector has been adapted to the new Hirose
EIA-J standard. All the necessary camera signals including the trigger are
sent via a cable connection. The JAI A1 provides all the familiar trigger
modes - "Edge Pre-Select", "Pulse Width Control", "Start/Stop", "Frame Delay
Read Out" and "Smearless".
High-resolution monochrome camera with progressive scan sensor
1/2" IT progressive-scan CCD
1392 x 1040 pixels
Pixel size: 4.65µm x 4.65µm
Analogue video output
Frame rate of 16 full frames/s
Asynchronous full frame shutter
Shutter adjustable to 1/200,000 s or via shutter control input for flexible control of the integration time
Long term integration via external controller
Sensitivity approximately 0.05 Lux on the sensor
Pin-compatible with all general purpose cameras using a HIROSE connection