Machine Vision Products - STEMMER IMAGING

FOCUS ON YOUR ADVANTAGE

FOR THE FUTURE

With Europe’s largest selection of leading machine vision technology

Automation Technology

Automation Technology or AT for short, was founded in 1998 and is located in Bad Oldesloe, Germany. The company manufactures 3D cameras and sensors for fast three dimensional measurements based on the sheet-of-light triangulation principle.

AT's core technology combines very high-speed CMOS sensors with smart FPGA preprocessing to extract height and texture data in a laser triangulation configuration. Delivering smart features such as line tracking and multiple region readout, these cameras deliver the industry's fastest laser triangulation solution with no load on the host processor.

AT's 3D products portfolio is divided into two families both using GigE Vision interface, the CX camera series (C2, C4 and C5) and the compact sensors.

Automation Technology FebriScan

The Automation Technology FebriScan is a complete LWIR camera solution for the detection of elevated body temperatures of human beings.

Automation Technology IRSX

A stand-alone solution for thermal machine vision

Automation Technology C5-CS

Robust and compact high performance 3D sensor with integrated laser line generator

All products from Automation Technology

File Topics Size
Automation Technology C2 Data sheets 245.2 KB
Automation Technology C4-1280-GigE Data sheets 1.3 MB
Automation Technology C4-2040-GigE Data sheets 1.2 MB
Automation Technology C4-2350-GigE Data sheets 739.6 KB
Automation Technology C4-4090-GigE Data sheets 671.1 KB
Automation Technology C5 Data sheets 570.2 KB
Automation Technology C5 1280-GigE Data sheets 586.5 KB
Automation Technology C5 CS Data sheets 578.5 KB

All downloads for Automation Technology

Innovative solution for detection of elevated body temperature

20/05/2020

STEMMER IMAGING AG has signed an agreement with Automation Technology for the distribution of it’s FebriScan systems - complete LWIR camera solutions for detecting elevated human body temperatures.

STEMMER IMAGING demonstrate vision for Industry 4.0 and machine learning capabilities

27/08/2018

Stand A44, PPMA Show 2018, NEC, Birmingham UK, 25 - 27 September 2018

STEMMER IMAGING will be replicating a pick and place application by integrating industrial imaging capabilities into an Industry 4.0 environment using the new OPC UA communication standard. Also on show will be a 3D system using a machine learning method to read braille characters on boxes. In addition, 2D smart cameras and 2D vision sensors will be set up various configurations for OCR and code reading.

All news for Automation Technology