STEMMER IMAGING

14/11/2019  |  

The release of CVB 2019 introduces new APIs to provide an innovative way of developing machine vision solutions with Common Vision Blox, together with an impressive range of new tools. These tools provide functionality for hyperspectral and polarisation imaging, as well as OPC UA machine to machine communication capability for Industry 4.0 requirements. In addition it is now possible to develop machine learning solutions on embedded platforms. Object recognition speeds have been greatly increased, as have video sequence recording speeds.

13/11/2019  |  

You would like to know, how HALCON 19.11 can advance your machine vision applications and even enables applications that were not possible before? If your answer is "yes", the upcoming webinar from MVTec is just right for you.

13/11/2019  |  

Significant growth in revenue and earnings; earnings forecast raised

• Revenue increase by 29.7 per cent to EUR 30.5 million in the first three months of the planned short financial year 2019 (previous year: EUR 23.5 million)
• Adjusted operating result (EBITDA) of EUR 4.0 million and an EBITDA margin of 13.1 per cent are significantly above the level of the previous year (EUR 2.3 million / EBITDA margin 9.7 per cent)
• Acquisition of machine learning software algorithms for the further development of the Common Vision Blox software library in the Deep Learning segment
• Announcement of one-time expenses of EUR 1.5 million for Q2 2019 by bringing forward costs from 2020 previously reported as adjusted
• Forecast for planned short financial year 2019: revenue in the range of EUR 59.0 to 65.0 million and EBITDA forecast raised from EUR 5.5 – 7.1 million to EUR 6.0 – 7.5 million

08/11/2019  |  

Machine vision is a well-established technique across a host of industries, improving quality and efficiency in the manufacturing and processing sectors. Its ability to make inspections reliably and at speed 24/7 makes it an invaluable enabling technology in quality control. Technological advances in machine vision continue to be made rapidly, opening up more and more possibilities.

31/10/2019  |  

The new JAI-GO-5100MP-PGE polarisation camera enables analysis of material thickness, stress points, and other defects not observable using standard imaging techniques. Featuring Sony’s IMX250MZR polarised CMOS sensor this GigE Vision camera can also reduce the effects of reflections and hot spots from shiny materials such as plastics and glass. The unique on-board calculation of key parameters such as angle and degree of linear polarisation frees up host resources for other processing tasks.

24/10/2019  |  

STEMMER IMAGING today held its first Capital Markets Day. Presentations by the Executive Board and senior management outlined the mid-term strategy for accelerated growth and upgrade in profitability.

• New positioning as leader in artificial vision leveraging today’s industrial machine vision competence
• Increased focus on value-added offerings based on its own innovative software and vision sub-systems
• First time publication of mid-term guidance: revenue level of EUR 200 million with a 10-12% EBITDA margin

24/10/2019  |  

Clear Vision Systems (CVS), manufactured by Kautex Textron CVS Ltd are designed to keep vehicle headlamps or the cameras and sensors used in Advanced Driver Assistance Systems clean from dirt, dust, frost, snow, and pollution. They are manufactured at Kautex plants in the UK, USA, China and the Czech Republic. Specialist water tubing assemblies used in these systems are constructed completely by hand.

18/10/2019  |  

Innovations, ideas and practical examples

The machine vision community including both experts and novices currently have the opportunity to learn about industry trends and discuss ideas and projects throughout Europe. For the fourth time, STEMMER IMAGING is organising the Machine Vision Technology Forum Tour. With over 1,000 visitors in Germany, the Netherlands and France, the kick-off events have broken a record. The tour continues to Sweden and UK.

01/10/2019  |  

As one of the first to feature a CXP-12 interface, the Optronis CamPerform Cyclone series of high-speed cameras are sure to create excitement in the machine vision sector. Thanks to the new CXP-12 interface and four CXP-12 channels they can achieve an unprecedented overall data transfer rate of 50 Gbit/s.

With a choice of sensor resolutions from 2 to 16 MPixels, frame rates of more than 2000 fps are possible at full HD resolution for high speed inline inspection, laser triangulation and 2D/3D metrology. Reducing the scan window to 256 x 8 pixels delivers an incredible 250,000 images per second. STEMMER IMAGING can also provide the expertise, frame grabbers and other components needed to harness the full capabilities of these cameras.

26/09/2019  |  

Wat kan 3D bin picking doen voor productieprocessen en logistieke centra? En hoe maken machine vision en deep learning met 3D bin picking een doorbraak in efficiency en effectiviteit mogelijk? Kijk zondag 29 september om 16.30 uur op RTL4 naar het programma ‘Helemaal Gek Van’ en laat het u uitleggen door René Stevens van STEMMER IMAGING.