Teledyne DALSA GEVA-300: the compact vision system
6 Mar 2013
The GEVA-300 system offers excellent cost savings for multi-camera vision applications, such as final inspection of large assemblies. The six high bandwidth Gigabit Ethernet (GigE) ports are compatible with a wide range of GigE cameras, which can be mixed to suit the application need and the fanless design of the GEVA-300 means it is rugged and reliable enough for harsh factory applications. Camera expansion is easily accommodated using commercially available network technologies, allowing large configurations to be realised with much lower system cost.
Compact system for up to four GigE Vision cameras
The GEVA-300 is based on the Intel® dual-core ATOM architecture that offers low power consumption and solid performance for a wide range of machine vision applications. The user is provided with 2 GB program memory, 40 GB SSD storage, six Gigabit Ethernet ports (four of which are typically used for connecting cameras), three USB ports, one RS-232 interface and VGA display. The compact vision system with its measurements of 42 mm x 145 mm x 198 mm works with Win7 Embedded 64-bit O/S and can also be expanded with an optional PL-USB companion module that offers I/O expansion and easy integration of up to four GigE Vision cameras.
Choose from two software packages
Vision solutions on the GEVA-300 are set up using Teledyne DALSA's iNspect or
Sherlock application software. The iNspect software is easy to use and
requires little or no prior vision experience, while the Sherlock software
offers greater flexibility to tackle more challenging inspection tasks. Both
software packages offer a wide selection of tools and capabilities for
applications requiring positioning, identification, verification, measurement,
and flaw detection.
Supported by Teledyne DALSA’s iNspect and Sherlock software tools, this cost- effective, integrated solution can address the vision needs of industries such as automotive, consumer, electronics, packaging and pharmaceutical.
The powerful GEVA-300 systems are available from all STEMMER IMAGING offices in Germany, Great Britain, France, Switzerland and the Netherlands.
Teledyne DALSA is one of the largest companies serving the machine vision industry and is unique in that it is vertically integrated; from sensor design and manufacture, through image capture and processing, to software for imaging optimisations and analysis.