Machine Vision Acquisition - STEMMER IMAGING

ACQUISITION

Secure and flexible image capture from

any source to any destination

DALSA XTIUM2-CLHS FX8 SFP+ LC

PCIe x8 Gen 3.0 Frame Grabber for acquisition of digital signals via CameraLink HS

  • Acquisition from area and line scan cameras
  • Supports a variety of Tap formats, bit depths and scan directions
  • Bit depth: 8 to 16 Bit Mono, RGB 8, RGB+Y 8-bit Colour (depending on tap configuration)
  • CLHS 1 to 2 lane configuration
  • Compliant with Camera Link HS (CLHS) specification version 1.0 (X-Protocol)
  • Max. image acquisition: 2.0 GB/s
  • Max. Data rate: 6.8 GB/s (host transfer, PCIe x8 Gen 3.0)

Inputs/Outputs:

  • Timing control logic for camera trigger, line scan direction and strobe signals
  • 4x opto-coupled general inputs where 2x are shared as acquisition trigger inputs (RS-422/TTL/12V/24V)
  • 8x LVTTL general Outputs where 1x is shared as Strobe Output
  • Encoder Inputs (RS422, AB with shaft encoder)

Features (selection):

  • 512 MB onboard frame buffer
  • Line trigger scaling
  • Configuration of the camera via CameraLink HS
  • Data Transfer Engine (DTE) for maximum bandwidth
  • 2x SFP+ cages
  • 1x 27 pin connector for GPIO
  • Multiple board synchronization grab from multiple cameras and frames
  • Data-forwarding (up to 2-lanes, matching max. camera input)
  • Half-length PCIe x8 card

Software SDKs:

  • Supports Sapera LT
  • Drivers for Common Vision Blox available

Supported operating systems:

  • Windows 7, Windows 10 32- and 64-bit
  • Linux (on request)

SFP+ Modules have to be purchased separately

Product features
PC interface PCIe x8 (Gen 3)
Operating temperature (°C) 10 to 50
Operating system Windows 7 (32/64-bit) / Windows 8 (32/64-bit) / Windows 10 (32/64-bit) / Linux (32/64-bit) / Wow64
Onboard processing yes
Onboard memory (MB) 512
Number of cameras (max) 1
Manufacturer Teledyne DALSA
Interface/standard CameraLink
Inputs SFP+
I/Os yes
Driver support Common Vision Blox / Teledyne DALSA Sapera
Dimensions (LxH, mm) 111 x 99.6
Design (plug-in card/box) Plug-in card
Connectors DH60-27P / 2* SFP+
Certificate CE / RoHS / FCC