CCS LDLB

Smart Barlights

Smart barlights with built-in controller for direct camera connection
High luminosity over long distances
Switchable between constant lighting and overdrive lighting
Collective control of daisy-chain connection of up to three units via a single trigger
External light intensity control and ON/OFF control
Available in the light colours red and white
IP67 model available for use in difficult environments

The new bar light CCS LDLB has a built-in controller with overdrive capabilities, and it comes in an IP67 configuration.

3 Reasons for CCS LDLB

Open all | Close all

You want minimum mechanical effort when using your illumination system

Most of the time illumination systems can only be installed at a very short working distance from the test object. This leaves little room for handling making it necessary to position the illumination first. The CCS LDLB allows a larger working distance between illumination and test object leaving enough space for repositioning if necessary.

Your benefit:

You have enough space for handling your illumination.

You want to precisely control multiple illumination units in a daisy-chain

If you want to connect multiple CCS LDLB units in a daisy-chain you only need a single trigger for control. All units are controlled by the same signal.

Your benefits:

You can easily synchronise multiple units.
You have less programming work as only a single trigger has to be defined.

You want simple cabling

The CCS LDLB can be connected directly with the camera without using an external controller. In addition, when using multiple illumination systems the units are connected via short cable sections. There is only one central connection for the trigger source.

Your benefit:

You need less cabling.

Specifications

Length of illumination area: 300 mm
Power consumption:
- Light colour red: max. 24 W
- Light colour white: max. 31 W
Input voltage: 24 VDC
Input current:
- Continuous mode: max. 1.3 A
- Overdrive mode: max. 6 A
Intensity control:
- Manual: Set any of 100 steps via the setting switch.
- External: Analog voltage(0 V to +10 V)

Markets and Applications

Automotive: Checking adhesive residues on door panels
Packaging: Checking cardboard in beverage containers
Traceability: Barcode reading on assembly lines for product verification
Shipping: Barcode reading on bottle pallets for completeness check

Show products

of products were found. products were found. Show all

Model	Lighting technique	Lighting geometry	Light colour	Light distribution	Beam angle
CCS LDLB-300RD-N	frontlight	bar light	Red	direct	not specified
CCS LDLB-300SW-N	frontlight	bar light	White	direct	not specified
CCS LDLB-IP67-300RD-N	frontlight	bar light	Red	direct	not specified
CCS LDLB-IP67-300SW-N	frontlight	bar light	White	direct	not specified