News-Service - Newsletter abonnieren - STEMMER IMAGING

Keeping you one step ahead

NEWS@IMAGING    

> Subscribe to our newsletter

Read more

The role of machine vision in manufacturing

25 Jul 2019

Machine vision already makes an important contribution to the manufacturing sector, primarily by providing automated inspection capabilities as part of QC procedures. However, the world of automation is becoming increasingly complex. Industry 4.0, the Internet of Things (IoT), cloud computing, artificial intelligence, machine learning and many other technologies present users and developers of vision systems with big challenges in the selection of the ideal system for their respective application.

An enabling technology

With rapid developments in many different areas including imaging techniques; CMOS sensors; embedded vision; machine and deep learning; robot interfaces; data transmission standards and image processing capabilities, vision technology can benefit manufacturing industry at many different levels. New imaging techniques have provided new application opportunities. For example hyperspectral imaging can provide information about the chemical composition of the materials being imaged. Computational imaging allows a series of images to be combined in different ways to reveal details that can’t be seen using conventional imaging techniques. Polarisation imaging can display stress patterns in materials. Other developments in machine vision technology lead to enhanced performance, integration and automation in manufacturing industry. The degree of integration can range from manual assembly assistance through to complete integration into OEM equipment and on to the demanding requirements of Industry 4.0.

Aiding manual assembly

There are still huge numbers of products that are assembled manually and a ‘human assist’ camera can be used to help to prevent errors in such operations. The operator follows a set of assembly instructions loaded into the camera and displayed on a monitor. After every action the system compares the result to the correct stored image to ensure that it has been carried out correctly and completely before the operator can move on to the next step. If an action is incomplete or if a mistake is made, it is displayed to the operator so that it can be corrected. Each step completed can be verified and recorded to provide data that can be used for assembly work analysis and traceability.

Adding vision to the production line

Using vision inspection on a manufacturing or packaging line is a well-established practice. Systems range from single-point self-contained smart cameras that carry out an inspection task and deliver a pass/fail result to the control system, to PC-based systems that may feature multiple cameras and/or multiple inspection stations. Vision systems can be retrofitted to existing lines or designed into new ones. Vision inspection can also be used in conjunction with statistical process control methods to not only check critical measurements but to analyse trends in these measurements. In this way, interventions can be made to adjust the process before any out-of-tolerance product is produced. This is probably the closest forerunner to the requirements of Industry 4.0.

Vision-guided robots

Industrial robots are already used extensively and with the emergence of collaborative robots and rapid developments in 3D image processing, they are being used much more in combination, particularly for vision-guided robotics. The vision system identifies the precise location of the object and these coordinates are transferred to the robot. Massive strides in vision-robot interfaces make this process much easier. One of the most popular uses for 3D robotic vision is in pick and place applications.

Embedded Vision

The availability of small, embedded processing boards, usually based on ARM architecture, offers great potential for the development of vision systems embedded into other equipment and manufacturing processes. Many of the leading image processing libraries and toolkits can now be ported to these platforms, offering a wider range of vision solutions in this format. Combining these processing capabilities with low cost cameras, including board level cameras, means that vision systems could be incorporated into a wide variety of products and processes with comparatively small cost overheads.

Machine and deep learning

There has been a lot of hype about deep learning in machine vision, which uses convolutional neural networks (CNNs) to carry out classification tasks by identifying characteristics learnt from a set of training images. However, the challenge remains that in industrial applications the number of available training images is limited while the tools, training time and processor resources remain high. Other machine learning approaches are rapidly becoming recognised as a cheaper and simpler to implement alternative to deep learning for industrial applications. This is likely to find traction for high-performance, flexible vertical solutions that will even run on inexpensive embedded systems, making extremely cost-effective systems possible.

Onwards to Industry 4.0

The essence of the smart factory of the future is to optimise the process using big data analytics based on the feedback from many different types of sensors that are monitoring the process. These, of course, will include simple and smart vision sensors as well as more sophisticated vision subsystems or systems. Critically, Industry 4.0 requires a common communication protocol for all sensor types in order to allow data transfer and sharing.

One standard which is proving popular in this area is the OPC UA platform-independent, open standard for machine-to-machine communications. Recently the VDMA (the Mechanical Engineering Industry Association in Germany) has announced OPC UA Companion Specifications for Robotics and Machine Vision which will provide compatibility with this standard for robots and vision systems respectively. The building blocks are beginning to come together.

Ricoh SC-10

A human assistance camera system to guide, check and verify manual assembly operations.

Ricoh

Hamburg, Germany

Since 1919 the Asahi Optical Co. has been producing optical components. In 1951 production of CCTV lenses was started, firstly under the brand name Cosmicar and later as Pentax.

STEMMER IMAGING

Puchheim, Germany

STEMMER IMAGING has been one of the leaders in the machine vision market since 1987. It is one of Europe's largest technology providers in this field. In 1997 STEMMER IMAGING presented Common Vision Blox (CVB), a powerful programming library for fast and reliable development and implementation of vision solutions, which has been deployed successfully throughout the world in more than 80,000 imaging applications in various industries.