STEMMER IMAGING

NEON-203B-JT2 Starter Kit:

• 1x NEON-203B-JT2 industrial AI camera
• 1x C-Mount lens (F1.4 / 8 mm focal length)
• 1x ADLINK DIN37D-01 terminal board (37-pin D-Sub connector / DIN rail mounting)
• 1x USB Type C Hub/adapter
• 1x 1.8 m USB Type C cable with locking screws
• 1x 0.3 m USB Type C cable
• 2x 1.5 m power cords: 1x category A, 1x category E
• 1x 2.0 m DB-15 to DB-37 I/O extension cable

Camera:

• 1/3.7" OnSemi Sensor (MT9P031) with rolling shutter
• Resolution: 1920 (H) x 1080 (V) pixels with 2.2 µm pixel size
• Frame rate: 30 frames/s (at full resolution)
• NVIDIA® Jetson™ TX2 module
• Software support: Ubuntu 18.04 L4T / Jetpack 4.2.1 / Basler Pylon 5.2.0.13457
• Memory: MicroSD slot for extended memory
• USB3 Type C connector supports DisplayPort up to 1920x1080P @ 30 fps
• Power supply: 12 VDC via DC Jack or 15 VDC via USB3
• Power consumption (camera only): < 30 W
• Dimensions: 123.3 x 77.5 x 66.9 (H x W x D in mm without lens)
• Weight: 700 g
• Lens mount: C-Mount
• Temperature range (operation): 0 to 45° C
• Temperature range (storage): -20 to 70° C

NVIDIA® Jetson™ TX2 (camera):

• Processor: ARM Cortex-A57 and NVIDIA® Denver 2
• Supported operating systems: Ubuntu 18.04
• GPU: 256-core NVIDIA® Pascal GPU
• Memory: 8 GB LPDDR4
• Storage: 32 GB eMMC (integrated)

Connectors (camera):

• 1x RJ-45
• 2x USB: 1x USB3 Type C, 1x USB2 Type Micro-B (OTG)
• 1x MicroSD
• 1x 8-pin wafer connector
• 1x 15-pin D-Sub connector (4x Digital In, 4x Digital Out, 1x UART- TXD/RXD/GND)
• 1x 12V DC Jack for DC input via supplied AC/DC adapter

Hub/adapter:

• Voltage input: 110 ~ 240 VAC
• Voltage output: 15 VDC via USB Type C
• Connectors: 1x USB Type C, 2x USB Type A, 1x HDMI, 1x SD slot