New model
DALSA XTIUM2-CXP PX8 SINGLE
CoaXPress Frame Grabber with one lane of 12.5 Gbps to connect 1 camera
- PC interface: PCIe x8 (Gen 3.0) for the acquisition of digital sources via 1x Micro-BNC (HD-BNC)
- Suitable for area and line scan cameras (monochrome & colour)
- Max. image acquisition data rate of 1.25 GB/s (system dependent)
- Power over CoaxPress (PoCXP)
Front GPIO: (DH60-27 pin connector)
- 4x optocoupled, general purpose inputs - universal or triggerable (5, 12 and 24 VDC signals)
- 8x configurable TTL outputs
- RS422 or TTL quadrature (phase A & B) shaft encoder inputs for external web synchronisation
Features (selection):
- Supports CXP cameras with 1 output channels with up to 12.5 GB/s
- Bit depth: Mono8/10/12/14/16, Bayer8/10/12, RGB8/10/12
- Maximum host bandwidth up to 6.4 GB/s
- 2 GB onboard image memory
- Output Lookup Tables
- Flat Field/Flat Line Correction (8-bit/pixel only)
- Supports Trigger-to-Image Reliability (T2IR)
- Comprehensive event notifications
- Time control logic for camera, trigger and strobe signals
- External trigger delay lower than 100 ns
- Mulit board synchronisation of up to 4 grabbers in one system
Software SDKs:
- Supports Sapera LT & Common Vision Blox
- Driver for Common Vision Blox available
Supported operating systems:
- Windows 10 (32- and 64-bit)
- Linux (64-bit) O/S
Product features
| Signal | digital |
|---|---|
| Programmable | no |
| Power over data interface | yes |
| PC interface | PCIe x8 (Gen 3) |
| Operating temperature (°C) | 10 to 50 |
| Operating system | Windows 10 (32/64-bit) |
| Onboard processing | no |
| Onboard memory (MB) | 2048 |
| Number of connectors (video) | 1 |
| Number of cameras (max) | 1 |
| Manufacturer | Teledyne DALSA |
| Interface/standard | CoaXPress |
| Inputs | CXP-12 |
| I/Os | yes |
| Driver support | Common Vision Blox / Teledyne DALSA Sapera |
| Dimensions (LxH, mm) | 140 x 100 |
| Design (plug-in card/box) | Plug-in card |
| Connectors | DH60-27P / 1* HD-BNC |
| Certificate | CE / RoHS / REACH / FCC |