Automation Technology C2

3D cameras with GigE Vision interface

The AT C2 series delivers 3D data at high speed across a GigE Vision compliant interface. The on-board pre-processing of the raw image data provides previously unattainable frame rates for inspection, measurement and sorting in the third dimension. Available in several models with profile widths of 640 pixels and 2040 pixels.

Configuration is made easy by the comprehensive feature set accessible via the plug and play GenICam protocol and is thus directly compatible with any software that is GigE Vision compliant, including STEMMER IMAGING's Common Vision Blox (CVB). A free of charge CVB CameraSuite licence is included with every camera. With a choice of data rates the AT C2 series can run up to 25 kHz . The in-built memory allows for output of either line profile data, or the ability to build an area profile internally.

Overview

3D acquisition using sheet-of-light triangulation
Evaluation of laser line position inside camera
Wide selection of 3D camera algorithms: profile-TRSH, profile-MAX, profile-Cog, optionally user specific
Maximum profile rate independent of the algorithm used
Up to 8 sensor read-out windows (AOIs) freely selectable in image or profile mode
Flexible trigger functions for profile and image triggering
Easy configuration and integration using the GenICam control grid

Implementation

Output of the range map via GigE Vision
IP67 rated housing
Optional lens protection tube made from anodised aluminium with sealing ring and anti-reflective glass shield
Robust M12 industrial connectors
RS422 encoder interface with programmable counter for profile trigger generation and integrated detection of direction of motion via I/O panel
Data transmission via Gigabit Ethernet. Configurable, opto-isolated I/O's for trigger function and synchronisation (opto-isolation via I/O panel)
Supported by Common Vision Blox
PC requirement: Gigabit Ethernet
Operating system: Windows 7, XP, Vista, WIN NT, 2000, Linux
Robust compact sensors with integrated camera, lens and line lasers also available

Models

Resolution 2048 x 1088 pixel or 648 x 488 pixel
Pixel size 5.5 x 5.5 µm or 7.4 x 7.4 µm
Profiles/s at full frame: 340 or 620
Profiles/s at 32 lines: up to 9.5 k

Specifications

Interface: GigE Vision
Lens mount: C or CS-mount
Global shutter
Data rates up to 25kHz
Compact, ruggedized housing rated IP67 and lens protection tube
Configurable camera modes: image mode, profile mode
Configurable selection of the data output, i.e. height data or height data plus intensity data
Programmable number of profiles to form a range map
Auto features for triggering, AOI setting and AOI tracking. Integrated noise filter, multi-slope and multi exposure for high dynamic range (HDR) imaging
Storage of a user defined start-up camera configuration in a configuration EEPROM
Integrated control of external illumination (laser) via I/O panel

Show products

of products were found. products were found. Show all

Model	Manufacturer	Sensor size (mm)	Horizontal res. (Px)	Pixel size (µm)	Interface	Max. profiles/s
AT C2-2040-GIGE	Automation Technology	13.00	2048	5.50	Gigabit Ethernet	1400
AT C2-2040HS-GIGE	Automation Technology	13.00	2048	5.50	Gigabit Ethernet	9500

Accessories

AT C2-LENSCOVER L=55MM

Lens protective cover for C2 and C5 camera series

Required for IP67-protection of lens
Max. lens dimensions:
- Length: 55 mm ...

AT C2-LENSCOVER L=65MM

Lens protective cover for C2 and C5 camera series

Required for IP67-protection of lens
Max. lens dimensions:
- Length: 65 mm ...

AT C2-LENSCOVER L=75MM

Lens protective cover for C2 and C5 camera series

Required for IP67-protection of lens
Max. lens dimensions:
- Length: 75 mm ...

AT C2-LENSCOVER L=85MM

Lens protective cover for C2 and C5 camera series

Required for IP67-protection of lens
Max. lens dimensions:
- Length: 85 mm ...

AT C2-LENSCOVER XXL

Lens protective cover for C2 camera series

special version for larger lenses
required for IP67-protection of lens
max. lens dimensions ...

Cabling accessories

AT C2-CABLE-C2-I/O-OP-10M

AT C2 cable Power + I/O + Laser Control

17 pin M12 female to open wire
Cable length see product name

AT C2-CABLE-C2-I/O-OP-20M

AT C2 cable Power + I/O + Laser Control

17 pin M12 female to open wire
Cable length see product name

AT C2-CABLE-C2-I/O-OP-3M

AT C2 cable Power + I/O + Laser Control

17 pin M12 female to open wire
Cable length see product name

AT C2-CABLE-C2-I/O-OP-5M

AT C2 cable Power + I/O + Laser Control

17 pin M12 female to open wire
Cable length see product name

CABLE NET-M12-10M

Ethernet cable to M12

8 pin M12 Male
RJ 45
Colour: Black
Cable length see product name

CABLE NET-M12-15M

Ethernet cable to M12

8 pin M12 Male
RJ 45
Colour: Black
Cable length see product name

CABLE NET-M12-1M

Ethernet cable to M12

8 pin M12 Male
RJ 45
Colour: Black
Cable length see product name

CABLE NET-M12-2,5M

Ethernet cable to M12

8 pin M12 Male
RJ 45
Colour: Black
Cable length see product name

CABLE NET-M12-20M

Ethernet cable to M12

8 pin M12 Male
RJ 45
Colour: Black
Cable length see product name

CABLE NET-M12-25M

Ethernet cable to M12

8 pin M12 Male
RJ 45
Colour: Black
Cable length see product name

CABLE NET-M12-3M

Ethernet cable to M12

8 pin M12 Male
RJ 45
Colour: Black
Cable length see product name

CABLE NET-M12-5M

Ethernet cable to M12

8 pin M12 Male
RJ 45
Colour: Black
Cable length see product name

CABLE NET-M12-7,5M

Ethernet cable to M12

8 pin M12 Male
RJ 45
Colour: Black
Cable length see product name

CABLE NET-M12-TRACK-10M