FebriScan

New

FebriScan

Detection of elevated body temperature

FebriScan from Automation Technology is a complete LWIR camera solution for detecting elevated human body temperatures. The high-precision, non-contact fever measurement method is ready for use in less than 5 minutes and enables body temperature measurement with the highest accuracy. The system consists of three components: an intelligent LWIR microbolometer camera, a temperature reference body and a specially developed app that is loaded into the camera's memory

The combination of intelligent thermal imaging camera, black reference body and pre-installed software allows for easy installation, fast measurement and location-independent use of an access monitoring system for your employees or visitors. The temperature measurement takes only a few seconds, the result is immediately displayed on the monitor supplied.

FebriScan is available as stationary portal version for different measurement distances or as mobile package for temporary screenings. For the fixed installation at one location we offer FebriScan in two different portal packages, consisting of camera, temperature reference body, pre-installed software, operating monitor and profiles for setting up a portal through which people have to walk for the screening. The mobile package contains tripods instead of fixed profiles and is therefore even easier to set up and dismantle.

Detection with FebriScan complies with the IEC 80601-2-59:2017 standard, where the infrared camera captures the person's face at the most heat-intensive part of the face, the inner eyelid angle of the eye, which corresponds to the actual body temperature, and then verifies the result. In order for the camera to capture the relevant area, glasses must not be worn during the measurements.

For cost-effective applications that do not necessarily have to comply with the IEC 80601-2-59:2017 standard, solutions with cameras with QVGA resolution are also available.

The scope of delivery includes the complete cabling, as well as all instructions and stickers that help to set up the system and position the measurement object.

Resons for the FebriScan solution

Open all | Close all

High-precision detection of elevated body temperature

High-precision detection according to the IEC 80601-259:2017 standard for all cameras with VGA resolution, automatic adjustment with temperature reference

Fully integrated, easy to set up solution

Complete solution for the detection of elevated human body temperatures. Combination of a smart thermal imaging camera, a black reference body, pre-installed software and a portal design for easy installation.
Setup in less than 5 minutes
Integrated fully automatic self-test function

The setup is built in less than 5 minutes and consists mainly of three components: a smart LWIR microbolometer camera, a temperature reference body and a specially developed app, which is loaded onto the camera's memory. The software also automatically detects the correct measurement position on the body, making set up very straightforward.

Measurement and evaluation in less than one second

The software automatically recognizes the correct measurement position on the subject's face. Direct display of the measurement result in GREEN or RED on the supplied screen.

Designed for 24/7 continuous operation

The system is designed for continuous use wherever a fast measuring process or contactless access control is required in the case of a high volume of people, e.g. public transport, public buildings or in the entrance area of a company.

All-In-One solution for fixed installations at one location
Intelligent camera IRSX-I 640S (configuration 1; other configurations available on request) with FebriScan App, M12 power cable-2m with power supply (pigtail power cable) and M12-RJ45-5m Ethernet cable
IP-blackbody with power cable and power supply
Portal 204cm x 112cm (H x W) with camera holder, blackbody holder, operator monitor holder, power supply holder, junction box, user display (WIFI coupled) with power supply
Operator monitor with embedded visualization PC and VESA mount (suitable for desktop installation), power supply, keyboard and mouse
Sticker/sign set (1x „no glasses“, 1x „keep distance“, 5x floor sticker „foot pair“)

The installation of this package requires the following conditions:

1x 110V / 220V power supply
1x table for operator monitor

Flexible setup with tripods for temporary screenings
Intelligent camera IRSX-I 640S (configuration 1 or 2; other configurations available on request) with FebriScan App, M12 power cable-0.5m, power supply (pigtail power cable) and M12-RJ45-0.5m Ethernet cable
IP-blackbody with power cable and power supply
2x tripods for camera (1.6m high) and blackbody (1.9m high) incl. power supply holder
Sticker/sign set (1x „no glasses“, 1x „keep distance“, 5x floor sticker „foot pair“)
Transportation case
User display (WIFI coupled) for mounting on camera tripod with power supply and embedded visualization PC (with integrated WIFI access point)
Optional: operator monitor with VESA mount (suitable for desktop installation), power supply, keyboard and mouse