Smart Vision Lights LE

IP65 rated monolithic bar light

The Smart Vision Lights LE series lights offer everything necessary in one sleek design, including rugged IP65-rated housing, strobe, constant current and overdrive operation (multi-drive), as well as the convenience of an aluminium extrusion T-slot mount.

The multi-drive controller allows the user to run the product in either continuous operation or pulse/strobe mode at the maximum allowed intensity by the LED manufacturer - by simply setting the product parameters. The built-in multi-driver also protects the LEDs from premature degradation and failure caused by excessive heat by regulating the current delivered to the LEDs and limiting the duty cycle of the light.

The housing with its internal driver is sealed to provide drip-proof/splash-proof protection, and the aluminium design provides maximum heat dissipation and ventilation to allow for pressure equalization. NPN or PNP signal input options, a 1-10 V analogue intensity control, and an industry standard M12 power cable allow for versatility and simplify installation.

Reasons to choose the Smart Vision Lights LE

Open all | Close all

Equipped with multi-drive controller

Built-in multi-drive allows the light to work in continuous operation or overdrive mode. The 1-10 V analogue control line gives the user total control over intensity in continuous mode. This is done by simply setting the product parameters to the maximum allowed intensity according to the datasheet of the LED. Removing the signal will put the light into overdrive mode.

Equipped with PNP and NPN strobe input

Used in strobed mode the light can easily be triggered from the strobe out signal of the camera.

Different lens options

The illumination can be provided with 3 different lens configurations: standard, wide or line.

Manufactured in a variety of wavelengths

The lights are available in the following standard colours: white (6500 K), blue (470 nm), green (530 nm), red (625 nm) and IR (850 nm and 940 nm). Additional wavelengths can be ordered upon request.

Robust housing for industrial environments

The IP65 rating allows the use in harsh environment without the need of additional housing. This reduces overall costs but also allows a more flexible integration in the machine. A T-slot channel on the back provides convenient mounting.

Specifications

Colour: white (6500 K), blue (470 nm), green (530 nm), red (625 nm) and IR (850 nm and 940 nm)
Lens: standard, wide or line
I/O: built-in driver with integrated strobe input, PNP and NPN input available, analogue intensity control via 1-10VDC
Dimensions: 300 mm, 600 mm, 900 mm and 1200 mm length
Protection: IP65 rated
Mechanical: T-slot channel on rear side for mounting

Markets and Applications

This is a general purpose illumination product fitting a wide range of applications. Its IP65 protection makes it particularly suitable for applications with elevated protection requirements.

Show products

Colour blue

SVL BAR LIGHT LE600-470

Bar light for continuous and over drive mode (Multi-Drive)