Machine Vision Illumination - STEMMER IMAGING

ILLUMINATION

Widest choice of technologies to maximise

the visibility of your object

CCS SQR / SQR-TP

Angled LED ring lights

CCS offers a large range of ring lights for homogeneous illumination. Both diffused and focused variants are available, all providing extremely uniform illumination. The SQR series and SQR-TP series both use compact square housings.

Heat dissipation material is used between the board and the aluminium housing, absorbing heat produced by the LEDs. This succeeds in greatly reducing the creation of heat, which causes the LEDs to deteriorate. The aluminium housing guarantees good heat dissipation.

These lights also support a strobe controller or an intensity controller, so that the same light can be used in different operational modes.



SQR

Like the LDR2, the SQR series is a direct light series where the LEDs are mounted perpendicular to a flat circuit board so that direct light is radiated towards the center of the workpiece. The rings of bullet-shaped LEDs are mounted on a square case.

There is a wide type version available with a +/- 40 degree beam angle. Diffusion plates and polarising plates are available for some models.

  • Colour: White, red, blue and green
  • Power supply: 24V light series
  • Connector: Standard connector, M12 and flying leads
  • Dimensions: 56 x 56 x 18 mm (width x depth x height).
  • Inner diameter: 30 mm
SQR-TP

The SQR-TP series is a direct light series at a low angle from an angled emitting part. Rings of surface-mounted LEDs mounted on a square case.

  • Colour: Red (638nm)
  • Power supply: 24V light series
  • Connector: Standard connector, M12 and flying leads
  • Dimensions: 28 x 28 x 4 mm and 34 x 34 x 6.6 mm (width x depth x height)

Show products

Colour UV

CCS SQR-56-UV365

CCS High density square format ringlight, 24V, 56mm x 56mm, ID 30mm, UV 365nm

Colour blue

CCS SQR-56BL2

CCS High density square format ringlight, 24V, 56mm x 56mm, ID 30mm, Blue

Colour green

CCS SQR-56GR2

CCS High density square format ringlight, 24V, 56mm x 56mm, ID 30mm, Green

Colour red

CCS SQR-56RD2

CCS High density square format ringlight

  • Outside diameter 56 mm
  • Inner diameter 30 mm
  • Mounting with M3
  • Light red (630 ...

CCS SQR-56RD2-WD

CCS High density square format ringlight

  • WD-version : +/- 40°
  • external diameter 56 mm
  • internal diameter 30 mm
  • assembly via M3
  • Colour ...

CCS SQR-TP-28-RD

LED-Ringlight with squared housing

  • Outer dimension 28 mm
  • Inner diameter 20 mm
  • Light output directed in 1 row with angle ...

CCS SQR-TP-34-RD

LED-Ringlight with squared housing

  • Outer dimension 34 mm
  • Inner diameter 20 mm
  • Light output directed in 1 row with angle ...
Colour white

CCS SQR-56SW2

CCS High density square format ringlight, 24V, 56mm x 56mm, ID 30mm, White

Diffusors

CCS DF-SQR-56

Diffusion plate for CCS SQR 56

Polariser

CCS PL-SQR-56

Polarising plate for CCS SQR 56