In this section we will cover some of the system features that are important when specifying a PC and a supplier for a vision system.
Only a few years ago compact and embedded PCs just did not have the performance needed for a machine vision system. This meant that PCs for machine vision often standardised on the 19" rack mount approach with server grade high-performance components installed. In recent years we have seen significant reductions in the power to performance ratio and are now seeing very capable fanless and compact industrial PCs without internal cables or internal moving parts, which can deliver performance with high environmental specifications suitable for both the hash environments of the factory floor and the processing power required for imaging. As in most markets there is a wide variety of options and invariably you get what you pay for. Time and time again it proves to be a false economy specifying office grade PCs in an industrial machine vision system.
Selecting the right components can make a huge difference to the performance of a vision system and its long-term reliability, especially as a vision system is expected to handle very large amounts of data (images) in quick succession. Not all PC systems are well suited for these tasks and most off-the-shelf domestic computers often have never been stress tested with continuous high throughput of data. Leaving the interface architecture to one side, as this is covered in the acquisition section in detail, some of the key considerations when specifying vision computing hardware are listed below.
Depending on the environment, a computer has to meet certain demands. When a system is deployed in a harsh industrial environment, considerations such as shock, vibration, thermal cycling, humidity and dust have to be considered, whereas a system used in a clean room can have lesser demands. Some environments specify extreme vibration resistance (for example mobile applications).
Other imaging applications demand stability even at extreme temperatures (for example traffic surveillance where the computers are installed outside). The same requirements have to be considered for the insides of a vision system.
There are many PC processor configurations, all with varying performances. In contrary to other applications, processor speed is not the only important factor in choosing a proper processor for an imaging application. In general suitable processors can be divided into three application areas:
Workstation processors are most commonly found in standard imaging applications, while mobile processors are often to be found in embedded vision systems due to their low power consumption. For the most demanding applications that need multiple processors or higher data throughput rates, server processors are often used as they offer more memory ports, increasing the data flow through the processor.
With Moore's law doubling performance of processors every two years, applications which needed server based performance 5 years ago can now be served using a fanless compact PC with mobile low power processors. With this high level of innovation in PC chipsets we see relatively short lifecycles of the processors used in general computing. This is at odds with the demands of an industrial system that requires a long period of availability and long-term support. Companies such as Intel pick a few specific processors and chipsets to be part of their embedded product lines. These have extended availability at a slightly higher cost.
In most cases a single chip includes two or four processors that allow different applications or tasks to run on each processor.
In theory, this doubles or quadruples the performance of the PC compared to a single processor based machine. This however is only beneficial for a vision application if the software supports 'multi-threading'. Multi-core processors offer a viable alternative to using two separate server processors such as the Intel Xeon. Typically, server motherboard designs support four processors, providing systems with 16 cores and more. The core count continues to increase as does memory bandwidth. Octo core processors are now available and we expect to see more in the future.
With the range of new processors and new architectures available on the market, there is a lot to consider when selecting the right processor. The following diagram should provide a quick overview of the relative performance of different processors. Attention should be paid to the fact that different algorithms put different loads on the processors.
These CPU benchmark values use the PassMark® ratings. As with any benchmark system, it cannot tell the whole story, as many factors can potentially influence the final result, but it provides a good reference point to compare different processors. To indicate the growth in performance, the processing capability of a mid range desktop processor from 2006 can now be equalled by an entry level ATOM processor with low power which enables fanless designs.