STEMMER IMAGING

PCIe x8 Gen 3.0 Frame Grabber for acquisition of digital signals via CameraLink HS

• Acquisition from area and line scan cameras
• Supports a variety of Tap formats, bit depths and scan directions
• Bit depth: 8 to 16 Bit Mono, RGB 8, RGB+Y 8-bit Colour (depending on tap configuration)
• CLHS 1 to 7 lane configuration
• Max. Data rate: 6.8 GB/s (host transfer, PCIe x8 Gen 3.0)

Inputs/Outputs:

• Timing control logic for camera trigger, line scan direction and strobe signals
• 4x Opto isolated Trigger (ExSync: Frame/Line)
• 4x TTL Outputs, configurable
• Encoder Inputs (RS422, AB with shaft encoder)

Features (selection):

• 512 MB onboard frame buffer
• Line trigger scaling
• iLUT for colour cameras
• Configuration of the camera via CameraLink HS
• Data Transfer Engine (DTE) for maximum bandwidth
• 2x CX4 thumbscrew connector
• 1x 27 pin connector for GPIO
• Multiple board synchronization grab from multiple cameras and frames
• Data-forwarding (up to 2-lanes, matching max. camera input)
• Half-length PCIe x8 card

Software SDKs:

• Supports Sapera LT
• Drivers for Common Vision Blox available

Supported operating systems:

• Windows 7, Windows 10 32- and 64-bit
• Linux (on request)