Machine Vision Illumination - STEMMER IMAGING

ILLUMINATION

Widest choice of technologies to maximise

the visibility of your object

CCS LDR2

Angled LED ring lights

CCS offers a large range of ring lights for homogeneous illumination. Both diffused and focused variants are available, all providing extremely uniform illumination. Operating distances range from about 25 mm to 250 mm depending on the diameter of the ring light.

The LDR2 uses flexible circuit board to illuminate workpieces at an angle. This alleviates the influence of slight position or inclination deviations in the workpiece and enables stable imaging and an extremely bright concentration of light in the centre of the illumination. The rings of LEDs are mounted on a circular case. The LDR2 ring lights are available as narrow or wide type. Operating distances range from about 25 mm to 250 mm depending on the diameter of the ring light. Some models have accessories including lens attachment rings, diffusion plates, polarising plates and mounting adapters for accessories.



Uniform illumination

The LDR2 uses flexible circuit board to illuminate workpieces at an angle. This alleviates the influence of slight position or inclination deviations in the workpiece and enables stable imaging and an extremely bright concentration of light in the centre of the illumination

Heat dissipation material and aluminium housing

Heat dissipation material is used between the board and the aluminium housing, absorbing heat produced by the LEDs. This succeeds in greatly reducing the creation of heat, which causes the LEDs to deteriorate. The aluminium housing guarantees good heat dissipation.

Different operating modes

It is also possible to connect a strobe controller or an intensity regulator to these units so that the same light can be used in various different operational modes

Different connector options and colours

Choose between standard connector, M12 and flying leads and a number of standard colors -> red (630nm), white (5.500K), blue (470nm) and green (525nm)


Specifications

  • Colour: White, red, blue and green
  • Power supply: 24V light series
  • Connector: Standard connector, M12 and flying leads
  • Dimensions: Outer diameters of 32 mm up to 120 mm, inner diameters of 10 mm up to 60 mm

Show products

Colour blue

CCS LDR2-120-BL2

LED ringlight for easy mounting

  • Outside diameter 120 mm
  • Inner diameter 60 mm
  • Mounted with M3 screws
  • Green blue
  • Operating ...

CCS LDR2-32-BL2

CCS ringlight

  • Outside diameter 32 mm
  • Inner diameter 10 mm
  • Recommended LWD 10 to 30 mm
  • 2 lightrings with directed ...

CCS LDR2-42-BL2

CCS dark field ringlight

  • Outside diameter 42 mm
  • Inner diameter 18 mm
  • Recommended LWD 20 to 60mm
  • 2 lightrings with ...

CCS LDR2-50-BL2

LED ringlight

  • Outside diameter 50 mm
  • Inner diameter 28 mm
  • Recommended LWD 40 to 100 mm
  • 2 lightrings with directed ...

CCS LDR2-70-BL2

LED ringlight

  • Outside diameter 70 mm
  • Inner diameter 35 mm
  • Recommended LWD 100 to 200 mm
  • 3 lightrings with directed ...

CCS LDR2-90-30-BL2

LED ringlight

  • Outside diameter 90 mm
  • Inner diameter 30 mm
  • Recommended LWD 60 to 250 mm
  • 6 lightrings with directed ...

CCS LDR2-90-BL2

LED ringlight

  • Outside diameter 90 mm
  • Inner diameter 50 mm
  • Recommended LWD 60 to 150 mm
  • 4 lightrings with directed ...
Colour green

CCS LDR2-120-GR2

LED ringlight for easy mounting

  • Outside diameter 120 mm
  • Inner diameter 60 mm
  • Mounted with M3 screws
  • Green light
  • Operating ...

CCS LDR2-32-GR2

CCS ringlight

  • Outside diameter 32 mm
  • Inner diameter 10 mm
  • Recommended LWD 10 to 30mm
  • 2 lightrings with directed emission ...

CCS LDR2-42-GR2

LED ringlight

  • Outside diameter 42 mm
  • Inner diameter 18 mm
  • Recommended LWD 20 to 60mm
  • 2 lightrings with directed emission ...

CCS LDR2-50-GR2

LED ringlight

  • Outside diameter 50 mm
  • Inner diameter 28 mm
  • Recommended LWD 40 to 100 mm
  • 2 lightrings with directed ...

CCS LDR2-70-GR2

LED ringlight

  • Outside diameter 70 mm
  • Inner diameter 35 mm
  • Recommended LWD 100 to 200 mm
  • 3 lightrings with directed ...

CCS LDR2-90-30-GR2

LED ringlight

  • Outside diameter 90 mm
  • Inner diameter 30 mm
  • Recommended LWD 60 to 250 mm
  • 6 lightrings with directed ...

CCS LDR2-90-GR2

LED ringlight

  • Outside diameter 90 mm
  • Inner diameter 50 mm
  • Recommended LWD 60 to 150 mm
  • 4 lightrings with directed ...
Colour red

CCS LDR2-120-RD2-WD

High intensity ring light (630 nm)

  • LED, red (wide angle)
  • ID 60 mm
  • OD 120 mm
  • M3 mouning holes
  • Power ...

CCS LDR2-32-RD2

CCS ringlight

  • Outside diameter 32 mm
  • Inner diameter 10 mm
  • Recommended LWD 10 to 30 mm
  • 2 lightrings with directed ...

CCS LDR2-42-RD2

High intensity ring light

  • LED, red (630 nm)
  • Inner diameter 18 mm
  • Outside diameter 42 mm
  • 2 rows of LEDs ...

CCS LDR2-50-RD2

High intensity ring light, 630 nm

  • LED, red
  • Inner diameter 28 mm
  • Outside diameter 50 mm
  • M3 mounting holes
  • Power ...

CCS LDR2-50-RD2-WD

High intensity ring light, 630 nm

  • wide angle version (+/-40°)
  • LED, red
  • Inner diameter 28 mm
  • Outside diameter 50 mm ...

CCS LDR2-70-RD2

High intensity ring light, 630 nm

  • LED, red (focused)
  • Inner diameter 35 mm
  • Outside diameter 70 mm
  • M3 mounting holes ...

CCS LDR2-70-RD2-WD

LED ringlight

  • Inner diameter 35 mm
  • Outside diameter 70 mm
  • Recommended LWD 50 to 120 mm
  • 3 lightrings with directed ...

CCS LDR2-90-30-RD2

LED ringlight

  • Outside diameter 90 mm
  • Inner diameter 30 mm
  • Recommended LWD 60 to 250 mm
  • 6 lightrings with directed ...

CCS LDR2-90-RD2

High intensity ring light

  • LED, Red (630 nm)
  • Inner diameter 50 mm
  • Outside diameter 90 mm
  • M3 mounting holes
  • Power ...

CCS LDR2-90-RD2-WD

High intensity ring light (630 nm)

  • LED, Red (wide angle)
  • Inner diameter 50 mm
  • Outside diameter 90 mm
  • M3 mounting ...
Colour white

CCS LDR2-120-SW2

LED ringlight for easy mounting

  • Outside diameter 120 mm
  • Inner diameter 60 mm
  • Mounted with M3 screws
  • White light
  • Operating ...

CCS LDR2-32-SW2

CCS ringlight

  • Inner diameter 10 mm
  • Outside diameter 32 mm
  • Recommended LWD 10 to 30 mm
  • 2 lightrings with directed ...

CCS LDR2-42-SW2

LED ringlight

  • Inner diameter 18 mm
  • Outside diameter 42 mm
  • Recommended LWD 20 to 60mm
  • 2 lightrings with directed emission ...

CCS LDR2-50SW2

High intensity ring light

  • LED, white
  • Inner diameter 28 mm
  • Outside diameter 50 mm
  • 2 x brightness compared with LDR2-50SW ...

CCS LDR2-70-SW2

New high intensity ring light

  • LED, white
  • Inner diameter 35 mm
  • Outside diameter 70 mm
  • Power requirement 24 VDC; 7 ...

CCS LDR2-90-30-SW2

LED ringlight

  • Outside diameter 90 mm
  • Inner diameter 30 mm
  • Recommended LWD 60 to 250 mm
  • 6 lightrings with directed ...

CCS LDR2-90-SW2

High intensity ring light

  • LED, white
  • Inner diameter 50 mm
  • Outside diameter 90 mm
  • 2x brightness compared with CCS LDR2-90SW ...
Adapter

CCS AD-LDR2-120

Adapter for installation of a diffusion plate or polarising filter to CCS LDR2-120

CCS AD-LDR2-32

Adapter for installation of a diffusion plate or polarising filter to CCS LDR2-32

CCS AD-LDR2-42

Adapter for installation of a diffusion plate or polarising filter to CCS LDR2-42

CCS AD-LDR2-50

Adapter for installation of a diffusion plate or polarising filter to CCS LDR2-50

CCS AD-LDR2-90

Adapter for installation of a diffusion plate or polarising filter to CCS LDR2-90

Diffusors

CCS DF-LDR2-120

Diffusion Plate For CCS LDR2-120

  • needs CCS AD-LDR2-120

CCS DF-LDR2-32

Diffusion Plate For CCS LDR2-32

  • needs CCS AD-LDR2-32

CCS DF-LDR2-42

Diffusion Plate For CCS LDR2-42

  • needs CCS AD-LDR2-42

CCS DF-LDR2-50

Diffusion plate for CCS LDR2-50

  • needs CCS AD-LDR2-50

CCS DF-LDR2-70

Diffusion plate for CCS LDR2-70

CCS DF-LDR2-90

Diffusion Plate For CCS LDR2-90

  • needs CCS AD-LDR2-90
Mechanical accessories

CCS MR-LDR2-32-M25

CCS Lens Attachment Ring for LDR2-32 range, M25.5 x 0.5

CCS MR-LDR2-32-M27

CCS Lens Attachment Ring for LDR2-32 range, M27 x 0.5

CCS MR-LDR2-32-M30

CCS Lens Attachment Ring for LDR2-32 range, M30.5 x 0.5

CCS MR-LDR2-50-M25

Lens attachment ring for CCS LDR2-50 range to lenses with filter thread M25.5 x 0.5

CCS MR-LDR2-50-M27

Lens attachment ring for CCS LDR2-50 range to lenses with filter thread M27 x 0.5

CCS MR-LDR2-50-M30

CCS Lens Attachment Ring for LDR2-50 ring light, M30,5 x 0.5

Polariser

CCS PL-LDR2-120

CCS Polarising plate for LDR2-120

CCS PL-LDR2-32

CCS Polarising plate for LDR2-32

  • needs CCS AD-LDR2-32

CCS PL-LDR2-42

CCS Polarising plate for LDR2-42
*need CCS AD-LDR2-42

CCS PL-LDR2-50

Polarising plate for CCS LDR2-50

  • Needs CCS AD-LDR2-50

CCS PL-LDR2-70

Polarising plate (incl. adapter) for CCS LDR2-70

CCS PL-LDR2-90

Polarising plate for CCS LDR2-90

  • CCS AD-LDR2-90 required
File Topics Size
CCS LDR2
Data sheets
878.5 KB
CCS RD2 Lineup
Data sheets
1.8 MB
CCS SW2 High Intensity White Light
Data sheets
523.2 KB