STEMMER IMAGING
International / English
Member of PRIMEPULSE
Machine Vision Acquisition - STEMMER IMAGING

ACQUISITION

Secure and flexible image capture from

any source to any destination

  1. Home
  2. Products
  3. Acquisition
  4. GigE input
  5. Silicon Software microEnable 4
Legacy

Silicon Software microEnable 4 

Programmable PCIe frame grabber for GigE Vision

Silicon Software's microEnable 4 is a family of programmable digital frame grabbers based on the PCI Express interface for GigE Vision.

Available with PCI Express x4 Gen 1 (quad lane) interfaces, with modern DMA900 technology for guaranteed data transfer bandwidth up to 850 MByte/s.

Getting started with GigE Vision cameras and CVB CameraSuite

In this tutorial STEMMER IMAGING expert Dr. Jon Vickers explains how to connect a GigE Vision camera using the Common Vision Blox (CVB) CameraSuite and how to overcome potential difficulties during the process.

Getting started with GigE Vision cameras and CVB CameraSuite
Elimination of stripes and shading in line scan camera images

This STEMMER IMAGING training videos shows you in simple steps how to perform a Flat Field Correction (FFC) for a machine vision line scan camera. The FFC will help to eliminate stripes and shading in line scan camera images.

Elimination of stripes and shading in line scan camera images

Specifications

  • Channels: 4 x Gigabit Ethernet
  • Bandwidth: DMA900 technology for guaranteed data transfer bandwidth of 850 Mbyte/s
  • Onboard memory: up to 512 MB for image buffering
  • Latency: low latency for precise triggering capability and feedback channels to camera
  • Processing: preprocessing or pre-analysis of image data eases the load on the host CPU
  • Power: Power over Ethernet (PoE) support
  • Product options: available as image acquisition card (A series) and as image processing card (V series)
  • PC interface: PCI Express x4 Gen 1 (quad lane)
  • Operating system: Windows XP up to Windows 10 with 32 and 64 bit, Linux on request
  • Software: supports Common Vision Blox (incl. GenAPI/GenICam)
  • Miscellaneous: fully compatible with add-on products such as trigger boards

Show products

of products were found. products were found. Show all
Model PC interface Inputs Power over data interface Number of cameras (max) Interface/standard
SISO MICROENABLE IV - AQ4-GE PCIe x4 (Gen 1) Single Link, LAG no 4 Gigabit Ethernet
SISO MICROENABLE IV - AQ4-GPoE PCIe x4 (Gen 1) Single Link, LAG yes 4 Gigabit Ethernet
SISO MICROENABLE IV - VQ4-GE PCIe x4 (Gen 1) Single Link, LAG no 4 Gigabit Ethernet
SISO MICROENABLE IV - VQ4-GPoE PCIe x4 (Gen 1) Single Link, LAG yes 4 Gigabit Ethernet
Accessories

SISO ME IV-TRIGGER I/O

TTL Triggerboard for microEnable 4 and 5 series

  • Triggerboard for TTL
  • 8 inputs
  • 8 outputs
  • connection with 2*D15 female ...

SISO OPTO-TRIGGER 5

Optocoupled trigger extension board for microEnable 4 and 5 series

  • Connection via 2 x SUB-D15 female sockets
  • 8 inputs
  • 8 ...
File Topics Size
Silicon Software microEnable 4 AD4-CL
Data sheets
2.0 MB
Silicon Software microEnable 4 AD4-LVDS
Data sheets
2.0 MB
Silicon Software microEnable 4 AD4-PoCL
Data sheets
2.0 MB
Silicon Software microEnable 4 AQ4-GE
Data sheets
2.0 MB
Silicon Software microEnable 4 AQ4-GPoE
Data sheets
2.0 MB
Silicon Software microEnable 4 VD4-CL
Data sheets
2.0 MB
Silicon Software microEnable 4 VD4-LVDS
Data sheets
2.0 MB
Silicon Software microEnable 4 VD4-PoCL
Data sheets
2.0 MB
Silicon Software microEnable 4 VQ4-GE
Data sheets
2.0 MB
Silicon Software microEnable 4 VQ4-GPoE
Data sheets
2.0 MB