Machine Vision Cameras - STEMMER IMAGING

CAMERAS

All types of camera, from area or line scan to

specialist solutions

Legacy

Smart Vision Lights Accessories

Bring your illumination solution to perfection

  • Accessories for completing illumination solutions like controllers and cables
  • Accessories for testing suitable illumination solutions


Models

  • Testbox for illumination colour (S75-SCB):
    • Changeable illumination colour to select the most suitable light for an application
    • Lower cost than with acquiring LEDs in the different colours
    • Can be used with CCD and CMOS cameras
    • Available in colours blue, green, red, white, IR and UV
  • Controller
    • PGM: pulse generator for strobing with any illumination of Smart Vision Lights
    • PTM (Pulse Timing Module): transforms trigger signals from the camera into trigger signals for the illumination in the suitable length for pulse width modulation (PWM)
    • ACC IVP-C1: potentiometer for manual setting of the intensity of Smart Vision Lights illuminations
  • Cables:
    • 5PM12: pre-assembled cable for Smart Vision Lights illuminations with M12 plug connection
    • W5PM: pre-assembled cable for rough environments with M12 plug connection
  • Kits for diffusors and polarizators:
    • ACC R130-DKit: diffusor kit for ring light R130/ODR130
    • ACC R80-DKit: diffusor kit for ring light R80/ODR80
    • ACC S75-DKit: diffusor kit for spot illumination S75/ODS75
  • Travel kit with various illuminations, test box for light colour, adapter rings and power supply

Specifications

  • Test box for illumination colour S75-SCB:
    • Rechargeable battery with up to two hours of continuous operation
    • Charging time for battery: 6 hours
  • PGM pulse generator:
    • Pulse frequency can be selected stepwise between 12 and 3200 Hz
    • For use with standard or overdrive illuminations of Smart Vision Lights
    • Power supply: 24 VDC
  • PTM pulse length controller:
    • Selection of 8 different pulse lengths between 20 µs and 1 ms
    • Response time / latency: 5 µs
    • Power supply: 24 VDC

Show products

Cabling

SVL 5PM12-J300

Jumper-Cable for Smart Vision Lights

  • 5 Pin M12 with male and female connectors
  • Cable length 300 mm

SVL 5PM12-J300-CTL

Jumper Cable for Smart Vision Lights to Dalsa Boa or Cognex IS7000 Series

  • 5 Pin M12 with male and female ...
Models

SVL ACC IVP-C1

Intensity Control- In line control variable potentiometer

  • Two-sided fitted with M12 connector
  • Total length: about 2 m

SVL ACC R130-DKIT

Diffusor Kit for Ring Light R130/ODR130 composed of

  • 1 diffusor with 50% Transmittance
  • 1 diffusor with 92% Transmittance
  • 6 ...

SVL ACC R130-LP

Linear Polarizer for Ring Light R130/ODR130

SVL ACC R80-DKIT

Diffusor Kit for Ring Light R80/ODR80 composed of

  • 1 diffusor with 50% Transmittance
  • 1 diffusor with 92% Transmittance
  • 4 ...

SVL ACC R80-LP

Linear Polarizer for Ring Light R80/ODR80

SVL COLOR BOX S75-SCB-UV-EURO

Color Box UV test light

  • UV: (395 & 365 nm)
  • Incl.Power Supply with universal adapter

SVL SVLK-100-625

Kit with following components

  • SVL SPOT LIGHT S30-625
  • SVL BRICK LIGHT S75-625
  • SVL RING LIGHT R80-625
  • SVL BAR LIGHT L300-625 ...

SVL SVLK-100-WHI

Kit with following components

  • SVL SPOT LIGHT S30-WHI
  • SVL BRICK LIGHT S75-WHI
  • SVL RING LIGHT R80-WHI
  • SVL BAR LIGHT L300-WHI ...
File Topics Size
Smart Vision Lights Color Box SWIR
Data sheets
2.2 MB
Smart Vision Lights TB-1000 Test Box
Data sheets
3.7 MB