The built-in driver allows the light to work in continuous operation or triggered mode. Its 0-10V analogue control line gives the user total control over intensity in both modes.
Smart Vision Lights Bricklight S75
High current bricklight with 6 LEDs
The Smart Vision Lights S75 series of bricklights features a constant current driver with NPN or PNP signal options. Six high current LEDs and a 75mm active light area provide not only an intense, but also diffuse light pattern at any given working distance.
The intensity of the light can be controlled via 0-10V remote analog signal or manual potentiometer. Heat is dissipated through the aluminium back plate which allows the S75 series to be run at a higher current and hence greater intensity.
Reasons to select the Smart Vision Lights S75
Used in strobed mode the light can easily be triggered from the strobe out signal of the camera.
The illumination can be provided with a standard and wide lens angle. Furthermore, the SB75 variant is equipped with an opaque diffusor for backlight applications.
The lights are available in the following standard colours: white (6500 K), blue (470 nm), green (530 nm), red (625 nm), IR (850 and 940 nm) and UV (365 and 395 nm).
The S75 light is available in an overdrive version ODS75 for all colours and optics options. Additionally, an IP68 protected variant (SW75) with a robust housing is the ideal option for applications in harsh environments.
- Colour: white, blue, green, red, IR (850 and 940 nm) and UV (365 and 395 nm)
- Lens: standard or wide
- I/O: built-in driver with integrated strobe input, PNP and NPN input available
- Dimensions: 80 x 75 x 35 mm
- Protection: IP68 rated variant available (SW75)
- Miscellaneous: overdrive version ODS75 available
Markets and Applications
This is a general purpose illumination product fitting a wide range of applications. The IP69K protection makes the SW75 version suitable for applications with elevated protection requirements.