The Teledyne DALSA Boa 2 is equipped with a software that is easy to work with. Applications can be realised through point & click procedure.
Your advantage:
- You can start your applications very easily and comfortably.
Teledyne DALSA Boa 2
Precise and fast smart camera
- Cost effective smart camera with high resolution CMOS sensor with big 5 µm pixels for an ideal image quality
- 1.5 GHz dual core processor for fast applications
- Easy embedded software with wide range of analysis tools for fast configuration and operation
- Application development can be done via web browser. Fully functional PC emulator for offline development included in delivery.
- 2 MP version available with integrated, highly sensitive ring light for uniform illumination of the inspection object
- IP67 housing for camera and lens
3 Reasons for Boa 2 ...
You want a system that is easily installed and started
You need particularly precise inspection results
The sensor of the Boa 2 has especially big pixels. Therefore the camera has a better dynamic and less noise than sensors with smaller pixels at the same resolution. That leads to an excellent image quality of the Boa 2.
Your advantage:
- You receive better quality image results which leads to increased accuracy and reliability of your inspection.
You want to install a system with the least effort possible
The 2 MP version of the Boa 2 is available with integrated illumintation. This saves construction space and you don't have to set up the illumination separately. This also means that you are independent from outer light conditions.
Your advantages:
- You save time for the installation of the illumination and you can start operation sooner.
- Illumination and camera are one unit and thus even if the facility vibrates no re-adjustment of camera and illumination are needed.
Specifications
- Storage: 4 GB storage, 1 GB programme storage
- Processor: 1.5 GHz dual core
- Pixel size: 5 µm
- Connection for illumination control
- Mounting holes on front, back, top and sides
Markets and Applications
- Precision part measurement
- Defect detection
- Assembly verification
Teledyne DALSA Vision Systems
Contact us
Sales / Consulting
+49 89 80902-0
+49 89 80902-116
sales@stemmer-imaging.de
Engineering / Technical Support
+49 89 80902-200
+49 89 80902-115
support@stemmer-imaging.de
Sales / Consulting
+49 89 80902-0
+49 89 80902-116
sales@stemmer-imaging.com
Engineering / Technical Support
+49 89 80902-200
+49 89 80902-115
support@stemmer-imaging.com
Callback Service
If you have a question or need some information please provide us some data. Our sales team will callback as soon as possible!
Models
High-resolution, Intelligent monochrome camera with software iNspect Express
- Resolution: 1664 (H) x 1216 (V) pixel with 5 µm pixel size ...
High-resolution, Intelligent monochrome camera with software iNspect Express
- Resolution: 1920 (H) x 1440 (V) pixel with 5 µm pixel size ...
High-resolution, Intelligent monochrome camera with software iNspect Express
- Resolution: 2560 (H) x 2048 (V) pixel with 5 µm pixel size ...
Accessories
Cabling accessories
I/O cable for DALSA BOA cameras
- 8-Pin connector male to female
- Length see product name
DALSA MISC-FULL-BOA2-M12-M12-10M
I/O cable for Dalsa Boa2 cameras to breakout module PL-101
- M12 12pin connector male to M12 12pin connector female ...
DALSA MISC-FULL-BOA2-M12-M12-1M
I/O cable for Dalsa Boa2 cameras to breakout module PL-101
- M12 12pin connector male to M12 12pin connector female ...
DALSA MISC-FULL-BOA2-M12-M12-3M
I/O cable for Dalsa Boa2 cameras to breakout module PL-101
- M12 12pin connector male to M12 12pin connector female ...
DALSA MISC-FULL-BOA2-M12-M12-5M
I/O cable for Dalsa Boa2 cameras to breakout module PL-101
- M12 12pin connector male to M12 12pin connector female ...
I/O cable for Dalsa Boa2/Spot cameras
- M12 12pin connector male to open ends
- Length see product name
I/O cable for Dalsa Boa2/Spot cameras
- M12 12pin connector male to open ends
- Length see product name
I/O cable for Dalsa Boa2/Spot cameras
- M12 12pin connector male to open ends
- Length see product name
I/O cable for Dalsa Boa2/Spot cameras
- M12 12pin connector male to open ends
- Length see product name
| File | Topics | Size | ||
| BOA2 Application Sheet | 06/2018 | Data sheets |
906.4 KB |
||
| Machine Vision for Food and Beverage | 06/18 | Data sheets |
1.3 MB |
||
| Teledyne DALSA Boa 2 | Data sheets |
137.7 KB |
||
| Teledyne DALSA Machine Vision for Automotive Manufacturing | 06/18 | Data sheets |
4.5 MB |