The high resolution of the Linea HS shows the smallest details in the inspected object. This detail is not even lost in low light conditions due to the high responsitivity of the sensor. For unevenly lit scenes or objects with strong contrast, the camera can be set to the high dynamic range (HDR) mode. With 2 TDI arrays the dark and light areas can be imaged at the same time, thereby improving the inspection time throughput. It ensures that details have good contrast in both bright and dark parts of the image. This requires less effort for illumination setup and data preprocessing, while improving the image quality at the same time.
Teledyne DALSA Linea HS
Advanced high speed, high sensitivity TDI camera
Based on Teledyne DALSA’s industry leading CMOS TDI sensor with 8k and 16k, the Linea HS cameras are the most advanced TDI products in our portfolio.
Linea HS is a high speed and high sensitivity imaging line scan cameras series. It provides cutting edge performance based on multi-array charge-domain CMOS TDI technology, offering new capabilities including mono/HDR, multifield, and super-resolution imaging for demanding applications. With up to 128 TDI stages (plus an extra 64 in HDR mode) for unmatched sensitivity and incredibly low noise, Linea HS excels in the highest speed, lowest light applications.
The cameras come with the next-generation CLHS interface, delivering data of up to 5 Gigapixels per second over a single fibre optic cable supporting error correction.
Reasons to select the Teledyne DALSA Linea HS
The Linea HS delivers line rates of up to 300 kHz. The application profits from the bidirectionality, because multiple scans can be executed very quickly. Using the AOI and ROI capability of the Linea HS to only scan the relevant object areas, the amount of data that needs processing can be decreased. This saves CPU time, which in turn can be used to process more image data. As a result, actual inspection times can be reduced, while less CPU power is necessary due to the data reduction already performed within the camera.
The DALSA Linea HS monochrome offers a choice between 64 or 128 TDI (Time Delay Integration) rows in the main array, so you can adjust the number of lines used according to your current application requirements and light conditions. This makes it easy to react to changing application requirements.
The multi AOI feature allows the creation up to 4 AOIs. This can be useful when inspecting several separated lanes of objects with a single camera, just by ignoring the image area between these lanes. Acquiring only the relevant image content means a reduction of data to process. This relieves the actual image processing stage and gives room for either faster computation or allows for less powerful hardware systems. Faster transferring also offers the possibility to use more economic cabling configurations.
Flat field correction (FFC) can be used to correct high intensity variations caused by either illumination or lensing. The device provides up to 4 regions within the pixel line to be specified for flat field correction. A well calibrated image improves and simplifies the image processing. It requires less complex image processing and therefore saves development time.
- Resolution: 8160 or 16352 pixels
- Sensor: highly sensitive monochrome CMOS TDI with 192 (128 + 64) rows
- HDR mode image data is collected from 2 TDI arrays
- Line rate: 300 kHz (monochrome)
- Pixel size: 5 µm x 5 µm
- Features: TDI row selection: 64 or 128 rows, multiple AOIs for data reduction, flat field correction, multifield configuration
- Interface: CameraLink HS with direct fibre optic output of CX4 connector
Markets and Applications
- Defect detection in flat panel display inspection
- Solder joint inspection in PCB-AOI (automated optical inspection)
- Film inspection
- Defect detection in glass inspection
- Print inspection
- Large format web inspection
- High performance machine vision
|Model||Interface||Monture de l'objectif||Taille des pixels (µm)||Résolution horizontale (Px)||Fréquence max. (kHz)||Longueur du capteur (mm)|
|DALSA LINEA HS-HM-16K30H New model||CameraLink HS||M90 x 1||5,0||16384||300||81,9|