ACQUISITION

Acquisition fiable et flexible de toute source d'image

Silicon Software microEnable 4 

Programmable PCIe frame grabber for GigE Vision

Silicon Software's microEnable 4 is a family of programmable digital frame grabbers based on the PCI Express interface for GigE Vision.

Available with PCI Express x4 Gen 1 (quad lane) interfaces, with modern DMA900 technology for guaranteed data transfer bandwidth up to 850 MByte/s.


Specifications

  • Channels: 4 x Gigabit Ethernet
  • Bandwidth: DMA900 technology for guaranteed data transfer bandwidth of 850 Mbyte/s
  • Onboard memory: up to 512 MB for image buffering
  • Latency: low latency for precise triggering capability and feedback channels to camera
  • Processing: preprocessing or pre-analysis of image data eases the load on the host CPU
  • Power: Power over Ethernet (PoE) support
  • Product options: available as image acquisition card (A series) and as image processing card (V series)
  • PC interface: PCI Express x4 Gen 1 (quad lane)
  • Operating system: Windows XP up to Windows 10 with 32 and 64 bit, Linux on request
  • Software: supports Common Vision Blox (incl. GenAPI/GenICam)
  • Miscellaneous: fully compatible with add-on products such as trigger boards

Contact

Technical Support

+33 1 45.06.95.60
+33 1 40.99.11.88
support@stemmer-imaging.fr

Sales / Consulting

+33 1 45.06.95.60
+33 1 40.99.11.88
sales@stemmer-imaging.fr

Callback Service

If you have a question or need some information please provide us some data. Our sales team will callback as soon as possible!

Callback Service

of products were found. products were found. Show all
Model Anzahl Kameras Power over data interface Entrées PC-interface Interface/Standard
SISO MICROENABLE IV - AD4-CL 2 no Full, Deca, Base, Medium PCIe x4 (Gen 1) CameraLink
SISO MICROENABLE IV - AD4-PoCL 2 yes Full, Deca, Base, Medium PCIe x4 (Gen 1) CameraLink HS
SISO MICROENABLE IV - AQ4-GE 4 no Single Link, LAG PCIe x4 (Gen 1) GigE Vision
SISO MICROENABLE IV - AQ4-GPoE 4 yes Single Link, LAG PCIe x4 (Gen 1) GigE Vision
SISO MICROENABLE IV - VD4-CL 2 no Full, Deca, Base, Medium PCIe x4 (Gen 1) CameraLink
SISO MICROENABLE IV - VD4-PoCL 2 yes Full, Deca, Base, Medium PCIe x4 (Gen 1) CameraLink
SISO MICROENABLE IV - VQ4-GE 4 no Single Link, LAG PCIe x4 (Gen 1) GigE Vision
SISO MICROENABLE IV - VQ4-GPoE 4 yes Single Link, LAG PCIe x4 (Gen 1) GigE Vision
Accessories

SISO ME IV CLIO FULL

Breakout board for me4 to distribut Cameralink signals

  • supports two Base up to Full configuration

SISO ME IV-TRIGGER I/O

Carte TTL I/O - microEnable 4/5

  • 8 entrées
  • 8 sorties
  • Connexion avec connecteur femelle 2*D15
  • Câble plat
  • compatible ...

SISO OPTO-TRIGGER 5

Module déclencheur opto-couplé pour les séries microEnable 4 et 5

  • Connexion via 2 x prises femelles SUB-D15
  • 8 entrées
  • 8 ...

SISO PIXELPLANT PX200E

PixelPlant PX200e coprocessorboard

  • Xilinx XC3S4000 FPGA
  • 512MB DDR-RAM
  • microEnable IV V-series
  • Digital I/O (8 IN, 8 OUT)