Gardasoft - PP 5xx & 4xx
Programmable LED lighting controller with 2 or 4 independent channels providing standard or fast timing, high overdrive current up to 10 A or more precise current settings (1 mA) up to 2 A. It can be configured using push buttons or remote via Ethernet and RS232.
Key Features
- Channels: 2 or 4 independent output channels
- Pulse width: down to 1 µs (for the fast version)
- Max. output current: up to 10 A, continuous current up to 2 A
- Output voltage: 0 - 47 V
- Power supply: 12 - 48 VDC
- Configuration: push-button or Ethernet interface
Find the right model for your needs
Use the filters below to narrow down your selection based on your application requirements
| Product Name | Intensity control method | LED controller interface | Manufacturer | Max. output power per channel (W) | Max. trigger frequency (Hz) | Number channels | Operating mode | Triniti | Weight (kg) |
|---|---|---|---|---|---|---|---|---|---|
| N/A | Ethernet | Gardasoft Vision | 10 | 25000 | 2 | continous mode; pulsed mode | no | N/A | |
| N/A | Ethernet | Gardasoft Vision | 10 | 50000 | 2 | continous mode; pulsed mode | no | N/A | |
| N/A | PushButton | Gardasoft Vision | 10 | 25000 | 2 | continous mode; pulsed mode | no | N/A | |
| N/A | PushButton | Gardasoft Vision | 10 | 50000 | 2 | continous mode; pulsed mode | no | N/A | |
| N/A | Ethernet | Gardasoft Vision | 10 | 25000 | 4 | continous mode; pulsed mode | no | N/A | |
| N/A | Ethernet; RS232 | Gardasoft Vision | 10 | 50000 | 4 | continous mode; pulsed mode | no | N/A |
Why choose Gardasoft - PP 5xx & 4xx?
Patented SafeSense technology for a safe overdriving of LED Lights
Accurate overdriving is a major step forward in LED lighting control; equally it is important to ensure that the lighting can never be overdriven outside of permissible current ratings. Gardasoft solves this problem: When a light is connected, the SafeSense technology runs a rapid routine that determines the actual rating of the light. SafeSense imposes safe working limits based on the pulse width and duty cycle for overdriving, thus providing full protection. In constant mode, the maximum output current allowed would be the maximum rating defined by SafeSense.
SafeSense works by using the following techniques:
- Sensing when a light is connected
- Finding the current rating of the light
- Driving the light within safe limit
- Detecting faults
High versatility to cover all use cases
All models offer the possibility of controlling the amount of light for different modes (continuous, dimming, pulsed, overdrive).
Gardasoft maintenance tool for intuitive configuration
GardasoftMaint is an essential application for supporting Gardasoft controllers. The maintenance application is a tool for discovering all the controllers in a network. It is used to access the controller’s web interface, send Ethernet commands, update firmware, and configure the IP address.