AV GOLDEYE G-032 SWIR COOL TEC2 F-MNT
SKU#:
24356
High-performance InGaAs sensor sensitive in the NIR/SWIR spectral range
Note: Actual product may vary from image!
You can find downloads in the corresponding product series:
Allied Vision - Goldeye
Contact us
Request prices
Errors and changes excepted. Our general terms and conditions apply. We supply exclusively to corporate customers.
Product Features
| Attributes | |
|---|---|
| Active sensor size (horizontal, mm) | 15.9 |
| Active sensor size (vertical, mm) | 12.7 |
| Bit depth | 10, 12, 14, 8 |
| Connector a: video | RJ45 (H) |
| Connector b: power | Hirose 12-pin |
| Digitalisation | 14 bit A/D-converter |
| Dimension (depth, mm) | 90 |
| Dimension (height, mm) | 80 |
| Dimension (width, mm) | 80 |
| Export regulations | If you export this item outside the EU you have to apply for an export licence according to EC term no. 428/2009 at your |
| Frame rate (Hz) | 100 |
| Resolution Horizontal (Px) | 636 |
| Housing | TEC2 with Fan |
| Interface | Gigabit Ethernet |
| Interface configuration | 1 GigE, GigE Vision, PoE |
| Lens mount | Nikon F-Mount |
| Note 1 | CoolingTEC2 → ΔTmax = -60 K |
| Note 2 | Bit depth 8-, 12-, 14-bit |
| Output formats | Mono12, Mono12Packed, Mono8 |
| Pixel size (µm) | 25 |
| Power consumption (W) | 22 |
| Power supply voltage (VDC) | 8 - 30 |
| Resolution (MP) | 0.3 |
| Scan type | area |
| Sensor configuration | Single sensor |
| Sensor format | 4/3" |
| Sensor model | InGaAs |
| Sensor size diagonal (mm) | 20.35 |
| Sensor type | InGaAs |
| Shutter type | Global shutter/Prog scan |
| Software CameraSuite | yes |
| Software driver CVB | yes |
| Wavelength range | SWIR |
| Resolution Vertical (Px) | 508 |
| Weight (kg) | 0.860 |
- Frame rate: up to 344 fps
- Responsitivity: 0.4 – 2.2 µm (depending on model)
- Features: gain/offset correction (NUC/non-uniformity correction) for each pixel, defect pixel correction (DPC), fixed pattern noise correction (FPNC)
- Lens mount: C-mount, F-Mount, M42
- Acquisition mode: continuous or triggered
- Interface: GigE Vision or CameraLink
- Software: compatible with Common Vision Blox
- Protection: high damage threshold against intense illumination
- Miscellaneous: available with Peltier cooling TEC1 or TEC2, additional external cooling (COOL), without cooling (TECLESS)
Services by STEMMER IMAGING - MORE than a product
STEMMER IMAGING offers a wide range of value-added services which we match to your individual requirements - from simple tasks to complex high-performance solutions.
More