Machine Vision Technology for Security and Defence Applications
High-resolution imaging, low latency and precise object identification determine what ground, airborne and maritime systems can detect, confirm and track. STEMMER IMAGING supplies industrial cameras, optics and embedded vision components, and co-develops solutions from early-stage engineering through to established subsystems.
Reliable Imaging for Demanding Applications
Vision systems used in security and defence must often operate under challenging conditions. Low light, fast-moving objects, long observation distances, vibration, harsh weather and continuous operation can all affect image quality and system reliability.
Meeting these requirements depends on more than selecting a camera. The complete imaging chain must be matched to the visual task, operating environment and system architecture.
See Reliably
The appropriate imaging technology depends on what must be detected, at what distance and under which conditions.
Visible-light, SWIR, thermal, high-speed, area scan and line scan cameras provide different capabilities for monitoring, identification, spectral imaging and motion analysis. Suitable optics and illumination help ensure that the relevant visual information is captured with the required detail and contrast.
Process Image Data
Frame grabbers, image acquisition interfaces, embedded platforms, industrial computers and image processing software turn captured images into usable data.
Bandwidth, latency, triggering and synchronisation are particularly important in multi-camera, mobile and time-critical applications.
Integrate for the Application
Reliable operation also depends on the physical and electrical integration of the vision system.
Protective housings, application-specific cables, connectivity components and suitable processing platforms help adapt the imaging architecture to demanding environments, restricted installation space and mobile or embedded systems.
Every Sensor Technology, One Partner.
Manufacturer-independent selection, engineering support and documentation across the full imaging chain.
The right sensor technology for the application
Different tasks call for different parts of the spectrum. STEMMER IMAGING's portfolio covers the following imaging technologies.
Visible
Detail and colour
NIR
Low-light contrast
SWIR
Material contrast
Thermal
Temperature patterns
Visible imaging
Industrial cameras and machine vision cameras for daylight observation, surveillance and recording, chosen for field of view, dynamic range and frame rate.
SWIR and NIR imaging
SWIR cameras and NIR cameras see through haze and through certain materials that block visible light, useful for low-visibility and long-range observation tasks.
Thermal imaging
Thermal cameras in the MWIR and LWIR range support night-time and all-weather observation, independent of ambient illumination.
Typical application examples in security and defence
Machine vision technologies can support applications including:
- perimeter and border surveillance
- access control and site monitoring
- traffic and vehicle identification
- reconnaissance and situational awareness
- image acquisition for object detection and tracking
- drone-based and unmanned imaging systems
- mobile and vehicle-mounted vision systems
- critical infrastructure and asset protection
- event monitoring and public safety
- inspection and monitoring in hazardous environments
In these applications, the imaging system provides visual data for monitoring, analysis, verification and downstream detection or recognition functions.
A few examples:
Vehicle-mounted observation systems
Camera systems mounted on ground vehicles give drivers and operators a stable view in daylight and low-light conditions. Component selection accounts for vibration, shock, and the protective window required at the installation position.
Optical confirmation for detection systems
Cameras complement radar or RF-based detection systems, providing visual confirmation and tracking of detected objects. Long focal length optics and low latency are typical requirements for this role, alongside reliable synchronisation with the other sensors in the system.
Training and simulation systems
Camera-based systems support calibration and target-acquisition exercises in training environments, where reproducible setups and dependable recording are the main requirements.
Why work with STEMMER IMAGING?
Custom component adaptation
Where standard components do not meet programme requirements, we work directly with manufacturers to manage specific hardware or firmware modifications - giving your engineering team a single point of contact.
Defence domain experience
We are familiar with the specific demands of this sector: strict requirements of long component lifecycles, confidentiality from the first project conversation, and the reliability standards that field conditions require.
Manufacturer-independent sourcing
Access to cameras, optics, embedded systems and interfaces from a broad range of suppliers, including NATO, EU and German-based manufacturers, selected to match the operational and procurement profile of each programme.
Application-specific configuration
Sensor, optics, interface and processing matched as a set to the application requirements. As a manufacturer-independent partner, we are not tied to a single manufacturer's portfolio.
Technical evaluation and engineering support
Feasibility testing, evaluation setups and engineering input from initial concept through to series specification. This includes support for environmental qualification against standards such as MIL-STD-810H.
Subsystem delivery and series preparation
Assembly, optical focusing, calibration, conformity certificates and custom labelling - components and subsystems delivered ready to deploy. Where standard housings do not fit, camera and component housings can be developed or modified to match specific installation constraints.
Top-level products for security and defence imaging in demanding environments
We are manufacturer-independent and not tied to specific manufacturers. This lets us select the components that best fit your application.
Depending on the application, an imaging architecture may include:
- industrial area scan and line scan cameras
- thermal, SWIR and high-speed cameras
- rugged and application-specific optics
- illumination systems
- image processing hardware and software
- embedded vision and industrial processing platforms
- frame grabbers and image acquisition interfaces
- triggering and synchronisation components
- protective housings
- application-specific cables and connectivity components
STEMMER IMAGING combines portfolio breadth with application and image-chain expertise to help configure technically coherent imaging architectures for demanding security and defence projects.
From Selection to Deployment
Defence and security projects rarely stop at component selection. STEMMER IMAGING supports the full path from initial evaluation to a documented, deployable subsystem, through three service categories.
Operational Services
Camera assembly, optical focusing and intrinsic calibration, together with conformity certificates and custom labelling. Components arrive ready for installation, with the documentation defence programmes require built in from the start.
Engineering Services
Feasibility testing and evaluation setups that let you validate a sensor or component choice before committing to a series specification. This includes support for environmental qualification planning against standards such as MIL-STD-810H.
Special Solutions & Applications
For projects requiring a qualified, series-ready subsystem, our Technical Competence Centre works with you from requirements through to delivery, including structured documentation for serial reproducibility.
Discuss Your Security and Defence Machine Vision Application with us
Whether you are developing a surveillance platform, an unmanned system, a mobile monitoring solution or another specialised imaging application, the technical architecture must match the required visual task and operating conditions.
Our experts support you in evaluating the application and selecting suitable cameras, optics, processing technology and integration components.
Frequently asked questions
What camera types does STEMMER IMAGING supply for defence applications?
Our portfolio includes industrial cameras and machine vision cameras for visible-light imaging, SWIR and NIR cameras for haze penetration and low-visibility tasks, and thermal cameras for night-time and all-weather observation. As a manufacturer-independent distributor, we match the right technology to each application profile rather than defaulting to a single supplier.
Are machine vision systems in defence always PC-based?
Not in practice. Most defence and security applications we work on use embedded computing platforms rather than conventional industrial PCs, for reasons of size, power consumption, ruggedness, and installation constraints. We can help identify the most appropriate platform for an application, or the most suitable camera interface to match a chosen processor and carrier board.
What is MIL-STD-810H, and how does it affect camera selection?
MIL-STD-810H is a US military standard defining environmental test methods, covering vibration, mechanical shock, temperature extremes, humidity, sand and dust, and salt fog. For camera selection, these requirements translate into specific decisions on housing sealing, connector type, and protective window material. We support customers in matching components to the relevant test categories for their application.
Which camera interfaces are relevant for surveillance and defence applications?
Interface selection depends on the application and processing architecture. For embedded, low-latency deployments, MIPI CSI-2, LVDS, and GMSL are commonly used. GigE Vision, CoaXPress, and HD-SDI are better suited to applications requiring longer cable runs or compatibility with existing infrastructure. We support customers in matching the interface to the platform from the outset.