Teledyne DALSA - Xtium
The Xtium-CLHS supports Camera Link HS with up to 7 lanes configuration and includes advanced data forwarding capabilities, enabling efficient distributed image processing across multiple systems.
Key Features
- Interface: CameraLink HS
- Camera type: monochrome and colour area scan and line scan with synchronisation of one or several boards for simultaneous image acquisition from multiple area or line scan cameras
- Signal processing: robust signal processing for external event synchronisation
- Host bandwidth: up to 3.4 GB/s
- Onboard frame buffer: up to 1 GB
- Half-length PCIe x8 card
- Operating system: Windows 7, Windows 10 and Windows 11 with 32 and 64 bit
- Software: Common Vision Blox, Sapera LT SDK and trigger-to-image reliability framework
Find the right model for your needs
Use the filters below to narrow down your selection based on your application requirements
| Nom de produit | Interface/Standard | Inputs | Connectors | Number of cameras (max) | Onboard processing | Manufacturer | Dimensions (LxH, mm) | Onboard memory (MB) |
|---|---|---|---|---|---|---|---|---|
| CameraLink | Single CLHS | 2* CX4; DH60-27P | 1 | yes | Teledyne DALSA | 100 x 100 | 512 | |
| CameraLink | Single CLHS | 2* CX4; DH60-27P | 1 | yes | Teledyne DALSA | 100 x 100 | 1024 |
Pourquoi choisir Teledyne DALSA - Xtium ?
Multi-board configurations
The data-forwarding feature of the Xtium-CLHS boards refers to a built-in repeater capability to resend images across multiple computers for distributed processing at 2.1 GB/s. The incoming images can be redistributed to up to six additional Xtium-CLHS “slave” frame grabbers.
Thanks to the "board synchronisation" features and data forwarding, multi-camera solutions can be developed and the higher material throughput enables more accurate error detection. The two CLHS models within the family enable different configuration possibilities and interface support the scalability.
Trigger-to-image reliability (T2IR) framework
T2IR ensures the image capture process is controlled and monitored from the trigger point right the way through to the transfer onto the host memory. T2IR is a combination of hardware and software features that work together at a system level to improve the reliability of the inspection system. This prevents many errors before they happen and makes the system more reliable, which in turn delivers more uptime, more productivity, and lower costs.