DALSA GENIE NANO-5G-C2050 IRC

SKU#: 40531

Small but fast high-speed data transfer via 5GigE

Nota: ¡El producto real puede variar respecto a la imagen!

Las descargas se encuentran en la serie de productos correspondiente:

Teledyne DALSA - Genie Nano-5GigE
Contáctanos > Solicitar precios

Se exceptúan errores y omisiones. Se aplican nuestros Términos y Condiciones Generales. Abastecemos exclusivamente a clientes corporativos.

Product Features

Attributes
Active sensor size (horizontal, mm) 7.07
Active sensor size (vertical, mm) 5.3
Bit depth 8
Connector a: video RJ45 (H)
Connector b: power 10-pin connector
Connector c: I/O 10-pin connector
Dimension (depth, mm) 59
Dimension (height, mm) 44
Dimension (width, mm) 32
Frame rate (Hz) 187
Resolution Horizontal (Px) 2048
Housing standard
Interface Gigabit Ethernet
Interface configuration 1 GigE, 5 GigE
Lens mount C-Mount
Operating temperature (°C) -20 - 65
Output formats Bayer8
Pixel size (µm) 3.45
Power consumption (W) 9.6
Power supply voltage (VDC) 12 - 36
Resolution (MP) 3.1
Scan type area
Sensor configuration Single sensor
Sensor format 1/1.8"
Sensor model IMX252
Sensor size diagonal (mm) 8.83
Sensor type CMOS
Shutter type Global shutter
Software CameraSuite yes
Wavelength range Colour, Visible
Resolution Vertical (Px) 1536
Weight (kg) 0.124
  • Sensor: large range of leading CMOS image sensors, from Sony and ON Semiconductor, colour and monochrome models available
  • Resolution: from 3,1 MPixel to 44,4 MPixel
  • Framerate: up to 187 fps
  • Features: cycling mode for various features multi-exposure feature and multi-ROI feature, binning, defect pixel correction, look-up-table, metadata support
  • EEE1588 PTP (Precision Time Protocol) support
  • Multicasting, distribution of image data to multiple PCs
  • TurboDrive V1.0 with lossless configuration can increase data rate in excess of 150% of GigE bandwidth and TurboDrive V2.0 with lossy configuration can exceed GigE bandwidth by more than 200 %. Both configurations can speed up line and frame rates beyond the nominal link capacity
  • Trigger-to-image reliability (T2IR) framework improves the reliability of the inspection system and protects the system from data loss
  • Lens mount: C- or F-mount, M42 x 1
  • Interface: GigE Vision 5GBASE-T (5 Gb/s)
  • Configuration: GenICam or ASCII command compatible interfaces
  • I/O: programmable inputs and outputs
  • Power requirement: PoE or 10-36 VDC
  • Operating temperature: -20° C to 65° C
  • Dimensions: 32 x 44 x 59 mm to 59 x 59 x 41 mm (W x H x D)
  • Weight: 124-183 g
  • Supports cable lengths up to 100 m (CAT-5e, CAT-6) or (4T-6A)

Servicios de STEMMER IMAGING - MORE que un producto

STEMMER IMAGING ofrece una amplia gama de servicios de valor añadido que adaptamos a tus necesidades individuales: desde tareas sencillas hasta complejas soluciones de alto rendimiento.

Más